| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Previously, PINGs and other frames extended possible keepalive time,
making it possible to keep an open HTTP/2 connection for a long time.
Now the connection is always closed as long as keepalive_timeout expires,
similarly to how it happens in HTTP/1.x.
Note that as a part of this change, incomplete frames are no longer
trigger a separate timeout, so http2_recv_timeout (replaced by
client_header_timeout in previous patches) is essentially cancelled.
The client_header_timeout is, however, used for SSL handshake and
while reading HEADERS frames.
|
|
Instead, keepalive_timeout and keepalive_requests are now used. This
is expected to simplify HTTP/2 code and usage. This also matches
directives used by upstream module for all protocols.
In case of default settings, this effectively changes maximum number
of requests per connection from 1000 to 100. This looks acceptable,
especially given that HTTP/2 code now properly supports lingering close.
Further, this changes default keepalive timeout in HTTP/2 from 300 seconds
to 75 seconds. This also looks acceptable, and larger than PING interval
used by Firefox (network.http.spdy.ping-threshold defaults to 58s),
the only browser to use PINGs.
|
|
Instead, the client_header_timeout is now used for HTTP/2 reading.
Further, the timeout is changed to be set once till no further data
left to read, similarly to how client_header_timeout is used in other
places.
|
|
The spdy_* directives are not available since introduction of HTTP/2 module
in nginx 1.9.5 more than five years ago.
|
|
New connections are marked reusable by ngx_http_init_connection() if there
are no data available for reading. As a result, if SSL is not used,
ngx_http_v2_init() might be called when the connection is marked reusable.
If a HEADERS frame is immediately available for reading, this resulted
in connection being preserved in reusable state with an active request,
and possibly closed later as if during worker shutdown (that is, after
all active requests were finalized).
Fix is to explicitly mark connections non-reusable in ngx_http_v2_init()
instead of (incorrectly) assuming they are already non-reusable.
Found by Sergey Kandaurov.
|
|
Prodded by Taewoo Kim.
|
|
If ngx_drain_connections() fails to immediately reuse any connections
and there are no free connections, it now additionally tries to reuse
a connection again. This helps to provide at least one free connection
in case of HTTP/2 with lingering close, where merely trying to reuse
a connection once does not free it, but makes it reusable again,
waiting for lingering close.
|
|
This is particularly important in HTTP/2, where keepalive connections
are closed with lingering. Before the patch, reusing a keepalive HTTP/2
connection resulted in the connection waiting for lingering close to
remain in the reusable connections queue, preventing ngx_drain_connections()
from closing additional connections.
The patch fixes it by marking the connection reusable again, and so
moving it in the reusable connections queue. Further, it makes actually
possible to reuse such connections if needed.
|
|
The "max_ack_delay", "ack_delay_exponent", and "max_udp_payload_size"
transport parameters were not communicated to client.
The "disable_active_migration" and "active_connection_id_limit"
parameters were not saved into zero-rtt context.
|
|
18.1. Reserved Transport Parameters
Transport parameters with an identifier of the form "31 * N + 27" for
integer values of N are reserved to exercise the requirement that
unknown transport parameters be ignored. These transport parameters
have no semantics, and can carry arbitrary values.
|
|
Two PING frames are sent per level that generate two UDP datagrams.
|
|
Setting the timer is brought into compliance with quic-recovery-34. Now it's
set from a single function ngx_quic_set_lost_timer() that takes into account
both loss detection and PTO. The following issues are fixed with this change:
- when in loss detection mode, discarding a context could turn off the
timer forever after switching to the PTO mode
- when in loss detection mode, sending a packet resulted in rescheduling the
timer as if it's always in the PTO mode
|
|
As per quic-transport-33:
An endpoint MUST acknowledge all ack-eliciting Initial and Handshake
packets immediately
If a packet carrying Initial or Handshake ACK was lost, a non-immediate ACK
should not be sent later. Instead, client is expected to send a new packet
to acknowledge.
Sending non-immediate ACKs for Initial packets can cause the client to
generate an inflated RTT sample.
|
|
Previously, the wrong end pointer was used, which could lead to errors
"quic failed to parse ack frame gap".
|
|
The token generation in QUIC is reworked. Single host key is used to generate
all required keys of needed sizes using HKDF.
The "quic_stateless_reset_token_key" directive is removed. Instead, the
"quic_host_key" directive is used, which reads key from file, or sets it
to random bytes if not specified.
|
|
Previously, client one was used.
|
|
The flag was introduced to create type-aware CONNECTION_CLOSE frames,
and now is replaced with frame type information, directly accessible.
Notably, this fixes type logging for received frames in b3d9e57d0f62.
|
|
The flag is used in ngx_http_finalize_connection() to switch client connection
to the keepalive mode. Since eaea7dac3292 this code is not executed for HTTP/3
which allows us to revert the change and get back to the default branch code.
|
|
|
|
This part somehow slipped away from c5840ca2063d.
While it is not expected to be needed in case of lingering close,
it is good to keep it for correctness (see 2b5528023f6b).
|
|
The function has not been updated with introduction of trailers support
in 7034:1b068a4e82d8 (1.13.2).
|
|
The change reduces diff to the default branch for
src/http/ngx_http_request_body.c.
Also, client Content-Length, if present, is now checked against the real body
size sent by client.
|
|
Previously, if an unexpected packet was received on an existing QUIC
connection, stateless reset token was neither recognized nor sent.
|
|
- split ngx_quic_process_packet() in two functions with the second one called
ngx_quic_process_payload() in charge of decrypring and handling the payload
- renamed ngx_quic_payload_handler() to ngx_quic_handle_frames()
- moved error cleanup from ngx_quic_input() to ngx_quic_process_payload()
- moved handling closed connection from ngx_quic_handle_frames() to
ngx_quic_process_payload()
- minor fixes
|
|
Previously, quic connection object was created when Retry packet was sent.
This is neither necessary nor convenient, and contradicts the idea of retry:
protecting from bad clients and saving server resources.
Now, the connection is not created, token is verified cryptographically
instead of holding it in connection.
|
|
This function should be called at the end of an event handler to prepare the
event for the next handler call. Particularly, the "active" flag is set or
cleared depending on data availability.
With this call missing in one code path, read handler was not called again
after handling the initial part of the client request, if the request was too
big to fit into a single STREAM frame.
Now ngx_handle_read_event() is called in this code path. Also, read timer is
restarted.
|
|
Keeping post_accept_timeout in ngx_listening_t is no longer needed since
we've switched to 1 second timeout for deferred accept in 5541:fdb67cfc957d.
Further, using it in HTTP code can result in client_header_timeout being
used from an incorrect server block, notably if address-specific virtual
servers are used along with a wildcard listening socket, or if we've switched
to a different server block based on SNI in SSL handshake.
|
|
The stub status module and ngx_http_send_response() (used by the empty gif
module and the "return" directive) incorrectly assumed that responding
to HEAD requests always results in r->header_only being set. This is not
true, and results in incorrect behaviour, for example, in the following
configuration:
location / {
image_filter size;
return 200 test;
}
Fix is to remove this incorrect micro-optimization from both stub status
module and ngx_http_send_response().
Reported by Chris Newton.
|
|
After 7675:9afa45068b8f and 7678:bffcc5af1d72 (1.19.1), during non-buffered
simple proxying, responses with extra data might result in zero size buffers
being generated and "zero size buf" alerts in writer. This bug is similar
to the one with FastCGI proxying fixed in 7689:da8d758aabeb.
In non-buffered mode, normally the filter function is not called if
u->length is already 0, since u->length is checked after each call of
the filter function. There is a case when this can happen though: if
the response length is 0, and there are pre-read response body data left
after reading response headers. As such, a check for u->length is needed
at the start of non-buffered filter functions, similar to the one
for p->length present in buffered filter functions.
Appropriate checks added to the existing non-buffered copy filters
in the upstream (used by scgi and uwsgi proxying) and proxy modules.
|
|
|
|
The ngx_http_set_lingering_close() function is not called for HTTP/3.
The change reduces diff to the default branch.
|
|
A header with the name containing null, CR, LF, colon or uppercase characters,
is now considered an error. A header with the value containing null, CR or LF,
is also considered an error.
Also, header is considered invalid unless its name only contains lowercase
characters, digits, minus and optionally underscore. Such header can be
optionally ignored.
|
|
|
|
- :method, :path and :scheme are expected exactly once and not empty
- :method and :scheme character validation is added
- :authority cannot appear more than once
|
|
The change reduces diff to the default branch for
src/http/ngx_http_request.c and src/http/ngx_http_parse.c.
|
|
Notably, the version negotiation table is updated to reject draft-33/QUICv1
(which requires a new TLS codepoint) unless explicitly asked to built with.
|
|
|
|
The quic kernel bpf helper inspects packet payload for DCID, extracts key
and routes the packet into socket matching the key.
Due to reuseport feature, each worker owns a personal socket, which is
identified by the same key, used to create DCID.
BPF objects are locked in RAM and are subject to RLIMIT_MEMLOCK.
The "ulimit -l" command may be used to setup proper limits, if maps
cannot be created with EPERM or updated with ETOOLONG.
|
|
It contains wrappers for operations with BPF maps and for loading BPF programs.
|
|
|
|
|
|
The low-level API was used in early QUIC development.
|
|
|
|
|
|
|
|
The <openssl/kdf.h> header is available since OpenSSL 1.1.0, and HKDF API
used for separate Extract and Expand steps in TLSv1.3 - since OpenSSL 1.1.1.
|
|
This API is available in BoringSSL for quite some time:
https://boringssl.googlesource.com/boringssl/+/3743aaf
|
|
|
|
|
|
|
