| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Previously, when a buffer was processed by the sub filter, its final bytes
could be buffered by the filter even if they don't match any pattern.
This happened because the Boyer-Moore algorithm, employed by the sub filter
since b9447fc457b4 (1.9.4), matches the last characters of patterns prior to
checking other characters. If the last character is out of scope, initial
bytes of a potential match are buffered until the last character is available.
Now, after receiving a flush or recycled buffer, the filter performs
additional checks to reduce the number of buffered bytes. The potential match
is checked against the initial parts of all patterns. Non-matching bytes are
not buffered. This improves processing of a chunked response from upstream
by sending the entire chunks without buffering unless a partial match is found
at the end of a chunk.
|
|
No functional changes.
|
|
When the stream is terminated the HEADERS frame can still wait in the output
queue. This frame can't be removed and must be sent to the client anyway,
since HTTP/2 uses stateful compression for headers. So in order to postpone
closing and freeing memory of such stream the special close stream handler
is set to the write event. After the HEADERS frame is sent the write event
is called and the stream will be finally closed.
Some events like receiving a RST_STREAM can trigger the read handler of such
stream in closing state and cause unexpected processing that can result in
another attempt to finalize the request. To prevent it the read handler is
now set to ngx_http_empty_handler.
Thanks to Amazon.
|
|
There is no reason to add the "Content-Length: 0" header to a proxied request
without body if the header isn't presented in the original request.
Thanks to Amazon.
|
|
According to RFC 7540, an endpoint should not send more than one RST_STREAM
frame for any stream.
Also, now all the data frames will be skipped while termination.
|
|
The ngx_http_v2_finalize_connection() closes current stream, but that is an
invalid operation while processing unbuffered upload. This results in access
to already freed memory, since the upstream module sets a cleanup handler that
also finalizes the request.
|
|
|
|
Previously, the stream's window was kept zero in order to prevent a client
from sending the request body before it was requested (see 887cca40ba6a for
details). Until such initial window was acknowledged all requests with
data were rejected (see 0aa07850922f for details).
That approach revealed a number of problems:
1. Some clients (notably MS IE/Edge, Safari, iOS applications) show an error
or even crash if a stream is rejected;
2. This requires at least one RTT for every request with body before the
client receives window update and able to send data.
To overcome these problems the new directive "http2_body_preread_size" is
introduced. It sets the initial window and configures a special per stream
preread buffer that is used to save all incoming data before the body is
requested and processed.
If the directive's value is lower than the default initial window (65535),
as previously, all streams with data will be rejected until the new window
is acknowledged. Otherwise, no special processing is used and all requests
with data are welcome right from the connection start.
The default value is chosen to be 64k, which is bigger than the default
initial window. Setting it to zero is fully complaint to the previous
behavior.
|
|
Since 4fbef397c753 nginx rejects with the 400 error any attempts of
requesting different host over the same connection, if the relevant
virtual server requires verification of a client certificate.
While requesting hosts other than negotiated isn't something legal
in HTTP/1.x, the HTTP/2 specification explicitly permits such requests
for connection reuse and has introduced a special response code 421.
According to RFC 7540 Section 9.1.2 this code can be sent by a server
that is not configured to produce responses for the combination of
scheme and authority that are included in the request URI. And the
client may retry the request over a different connection.
Now this code is used for requests that aren't authorized in current
connection. After receiving the 421 response a client will be able
to open a new connection, provide the required certificate and retry
the request.
Unfortunately, not all clients currently are able to handle it well.
Notably Chrome just shows an error, while at least the latest version
of Firefox retries the request over a new connection.
|
|
|
|
A special last buffer with cl->buf->pos set to NULL can be present in
a chain when writing request body if chunked encoding was used. This
resulted in a NULL pointer dereference if it happened to be the only
buffer left after a do...while loop iteration in ngx_write_chain_to_file().
The problem originally appeared in nginx 1.3.9 with chunked encoding
support. Additionally, rev. 3832b608dc8d (nginx 1.9.13) changed the
minimum number of buffers to trigger this from IOV_MAX (typically 1024)
to NGX_IOVS_PREALLOCATE (typically 64).
Fix is to skip such buffers in ngx_chain_to_iovec(), much like it is
done in other places.
|
|
|
|
|
|
The WINDOW_UPDATE frame could be left in the output queue for an indefinite
period of time resulting in the request timeout.
This might happen if reading of the body was triggered by an event unrelated
to client connection, e.g. by the limit_req timer.
|
|
This prevents possible processing of such frames and triggering
rb->post_handler if an error occurred during r->request_body
initialization.
|
|
Particularly this prevents sending WINDOW_UPDATE with zero delta
which can result in PROTOCOL_ERROR.
Also removed surplus setting of no_flow_control to 0.
|
|
The ngx_thread_pool_done object isn't volatile, and at least some
compilers assume that it is permitted to reorder modifications of
volatile and non-volatile objects. Added appropriate ngx_memory_barrier()
calls to make sure all modifications will happen before the lock is released.
Reported by Mindaugas Rasiukevicius,
http://mailman.nginx.org/pipermail/nginx-devel/2016-April/008160.html.
|
|
Refusing streams is known to be incorrectly handled at least by IE, Edge
and Safari. Make sure to provide appropriate logging to simplify fixing
this in the affected browsers.
|
|
After the 92464ebace8e change, it has been discovered that not all
clients follow the RFC and handle RST_STREAM with NO_ERROR properly.
Notably, Chrome currently interprets it as INTERNAL_ERROR and discards
the response.
As a workaround, instead of RST_STREAM the maximum stream window update
will be sent, which will let client to send up to 2 GB of a request body
data before getting stuck on flow control. All the received data will
be silently discarded.
See for details:
http://mailman.nginx.org/pipermail/nginx-devel/2016-April/008143.html
https://bugs.chromium.org/p/chromium/issues/detail?id=603182
|
|
A client is allowed to send requests before receiving and acknowledging
the SETTINGS frame. Such a client having a wrong idea about the stream's
could send the request body that nginx isn't ready to process.
The previous behavior was to send RST_STREAM with FLOW_CONTROL_ERROR in
such case, but it didn't allow retrying requests that have been rejected.
|
|
No functional changes.
|
|
This prevents forming empty records out of such buffers. Particularly it fixes
double end-of-stream records with chunked transfer encoding, or when HTTP/2 is
used and the END_STREAM flag has been sent without data. In both cases there
is an empty buffer at the end of the request body chain with the "last_buf"
flag set.
The canonical libfcgi, as well as php implementation, tolerates such records,
while the HHVM parser is more strict and drops the connection (ticket #950).
|
|
|
|
|
|
It is implied for "x" and "X".
|
|
This makes ngx_unix_recv() and ngx_udp_unix_recv() differ minimally.
|
|
There's no real need in two separate implementations,
with and without kqueue support.
|
|
Now all functions always drop the ready flag in this case.
|
|
There's no real need in two separate implementations,
with and without kqueue support.
|
|
|
|
|
|
|
|
There are two improvements:
1. Support for request body filters;
2. Receiving of request body is started only after
the ngx_http_read_client_request_body() call.
The last one fixes the problem when the client_max_body_size value might not be
respected from the right location if the location was changed either during the
process of receiving body or after the whole body had been received.
|
|
RFC 7540 states that "A server can send a complete response prior to the client
sending an entire request if the response does not depend on any portion of the
request that has not been sent and received. When this is true, a server MAY
request that the client abort transmission of a request without error by sending
a RST_STREAM with an error code of NO_ERROR after sending a complete response
(i.e., a frame with the END_STREAM flag)."
This should prevent a client from blocking on the stream window, since it isn't
maintained for closed streams. Currently, quite big initial stream windows are
used, so such blocking is very unlikly, but that will be changed in the further
patches.
|
|
It was broken since introduction (__GNU__ instead of __GNUC__) and did
nothing. Moreover, GCC 2.7 is happy with the normal version of the code.
Reported by Joel Cunningham,
http://mailman.nginx.org/pipermail/nginx-devel/2016-March/007964.html.
|
|
SSLeay_version() and SSLeay() are no longer available if OPENSSL_API_COMPAT
is set to 0x10100000L. Switched to using OpenSSL_version() instead.
Additionally, we now compare version strings instead of version numbers,
and this correctly works for LibreSSL as well.
|
|
To increment reference counters we now use newly introduced X509_up_ref()
function.
|
|
|
|
OpenSSL removed support for all 40 and 56 bit ciphers.
|
|
OPENSSL_config() deprecated in OpenSSL 1.1.0. Additionally,
SSL_library_init(), SSL_load_error_strings() and OpenSSL_add_all_algorithms()
are no longer available if OPENSSL_API_COMPAT is set to 0x10100000L.
The OPENSSL_init_ssl() function is now used instead with appropriate
arguments to trigger the same behaviour. The configure test changed to
use SSL_CTX_set_options().
Deinitialization now happens automatically in OPENSSL_cleanup() called
via atexit(3), so we no longer call EVP_cleanup() and ENGINE_cleanup()
directly.
|
|
|
|
|
|
LibreSSL defines OPENSSL_VERSION_NUMBER to 0x20000000L, but uses an old
API derived from OpenSSL at the time LibreSSL forked. As a result, every
version check we use to test for new API elements in newer OpenSSL versions
requires an explicit check for LibreSSL.
To reduce clutter, redefine OPENSSL_VERSION_NUMBER to 0x1000107fL if
LibreSSL is used. The same is done by FreeBSD port of LibreSSL.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
