| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Check for OCSP status was missed in 581cf2267, resulting
in a broken validation.
Reported by Mufeed VH of Winfunc Research.
|
|
|
|
The function interface is changed to follow a common approach
to other functions used to setup SSL_CTX, with an exception of
"ngx_conf_t *cf" since it is not bound to nginx configuration.
This is required to report and propagate SSL_CTX_set_ex_data()
errors, as reminded by Coverity (CID 1668589).
|
|
|
|
Variables contain the IANA name of the signature scheme[1] used to sign
the TLS handshake.
Variables are only meaningful when using OpenSSL 3.5 and above, with older
versions they are empty. Moreover, since this data isn't stored in a
serialized session, variables are only available for new sessions.
[1] https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml
Requested by willmafh.
|
|
OCSP response in TLSv1.3 is sent in the Certificate message. This
is incompatible with pre-compression of the configured certificates.
|
|
This brings feature parity with OpenSSL after the previous change,
making it possible to set SSL protocols per virtual server.
|
|
The change introduces an SNI based virtual server selection during
early ClientHello processing. The callback is available since
OpenSSL 1.1.1; for older OpenSSL versions, the previous behaviour
is kept.
Using the ClientHello callback sets a reasonable processing order
for the "server_name" TLS extension. Notably, session resumption
decision now happens after applying server configuration chosen by
SNI, useful with enabled verification of client certificates, which
brings consistency with BoringSSL behaviour. The change supersedes
and reverts a fix made in 46b9f5d38 for TLSv1.3 resumed sessions.
In addition, since the callback is invoked prior to the protocol
version negotiation, this makes it possible to set "ssl_protocols"
on a per-virtual server basis.
To keep the $ssl_server_name variable working with TLSv1.2 resumed
sessions, as previously fixed in fd97b2a80, a limited server name
callback is preserved in order to acknowledge the extension.
Note that to allow third-party modules to properly chain the call to
ngx_ssl_client_hello_callback(), the servername callback function is
passed through exdata.
|
|
The ssl_certificate_compression directive allows to send compressed
server certificates. In OpenSSL, they are pre-compressed on startup.
To simplify configuration, the SSL_OP_NO_TX_CERTIFICATE_COMPRESSION
option is automatically cleared if certificates were pre-compressed.
SSL_CTX_compress_certs() may return an error in legitimate cases,
e.g., when none of compression algorithms is available or if the
resulting compressed size is larger than the original one, thus it
is silently ignored.
Certificate compression is supported in Chrome with brotli only,
in Safari with zlib only, and in Firefox with all listed algorithms.
It is supported since Ubuntu 24.10, which has OpenSSL with enabled
zlib and zstd support.
The actual list of algorithms supported in OpenSSL depends on how
the library was configured; it can be brotli, zlib, zstd as listed
in RFC 8879.
|
|
In OpenSSL, session resumption always happens in the default SSL context,
prior to invoking the SNI callback. Further, unlike in TLSv1.2 and older
protocols, SSL_get_servername() returns values received in the resumption
handshake, which may be different from the value in the initial handshake.
Notably, this makes the restriction added in b720f650b insufficient for
sessions resumed with different SNI server name.
Considering the example from b720f650b, previously, a client was able to
request example.org by presenting a certificate for example.org, then to
resume and request example.com.
The fix is to reject handshakes resumed with a different server name, if
verification of client certificates is enabled in a corresponding server
configuration.
|
|
A new directive "ssl_certificate_cache max=N [valid=time] [inactive=time]"
enables caching of SSL certificate chain and secret key objects specified
by "ssl_certificate" and "ssl_certificate_key" directives with variables.
Co-authored-by: Aleksei Bavshin <a.bavshin@nginx.com>
|
|
This simplifies merging protocol values after ea15896 and ebd18ec.
Further, as outlined in ebd18ec18, for libraries preceeding TLSv1.2+
support, only meaningful versions TLSv1 and TLSv1.1 are set by default.
While here, fixed indentation.
|
|
MSVC generates a compilation error in case #if/#endif is used in a macro
parameter.
|
|
TLSv1 and TLSv1.1 are formally deprecated and forbidden to negotiate due
to insufficient security reasons outlined in RFC 8996.
TLSv1 and TLSv1.1 are disabled in BoringSSL e95b0cad9 and LibreSSL 3.8.1
in the way they cannot be enabled in nginx configuration. In OpenSSL 3.0,
they are only permitted at security level 0 (disabled by default).
The support is dropped in Chrome 84, Firefox 78, and deprecated in Safari.
This change disables TLSv1 and TLSv1.1 by default for OpenSSL 1.0.1 and
newer, where TLSv1.2 support is available. For older library versions,
which do not have alternatives, these protocol versions remain enabled.
|
|
Starting from TLSv1.1 (as seen since draft-ietf-tls-rfc2246-bis-00),
the "certificate_authorities" field grammar of the CertificateRequest
message was redone to allow no distinguished names. In TLSv1.3, with
the restructured CertificateRequest message, this can be similarly
done by optionally including the "certificate_authorities" extension.
This allows to avoid sending DNs at all.
In practice, aside from published TLS specifications, all supported
SSL/TLS libraries allow to request client certificates with an empty
DN list for any protocol version. For instance, when operating in
TLSv1, this results in sending the "certificate_authorities" list as
a zero-length vector, which corresponds to the TLSv1.1 specification.
Such behaviour goes back to SSLeay.
The change relaxes the requirement to specify at least one trusted CA
certificate in the ssl_client_certificate directive, which resulted in
sending DNs of these certificates (closes #142). Instead, all trusted
CA certificates can be specified now using the ssl_trusted_certificate
directive if needed. A notable difference that certificates specified
in ssl_trusted_certificate are always loaded remains (see 3648ba7db).
Co-authored-by: Praveen Chaudhary <praveenc@nvidia.com>
|
|
|
|
|
|
Originally, the stream module was developed based on the mail module,
following the existing style. Then it was diverged to closely follow
the http module development. This change updates style to use sscf
naming convention troughout the stream module, which matches the http
module code style. No functional changes.
|
|
Server name is taken either from ngx_stream_ssl_module or
ngx_stream_ssl_preread_module.
The change adds "default_server" parameter to the "listen" directive,
as well as the following directives: "server_names_hash_max_size",
"server_names_hash_bucket_size", "server_name" and "ssl_reject_handshake".
|
|
|
|
Now it properly detects invalid shared zone configuration with omitted size.
Previously it used to read outside of the buffer boundary.
Found with AddressSanitizer.
|
|
The variable contains a negotiated curve used for the handshake key
exchange process. Known curves are listed by their names, unknown
ones are shown in hex.
Note that for resumed sessions in TLSv1.2 and older protocols,
$ssl_curve contains the curve used during the initial handshake,
while in TLSv1.3 it contains the curve used during the session
resumption (see the SSL_get_negotiated_group manual page for
details).
The variable is only meaningful when using OpenSSL 3.0 and above.
With older versions the variable is empty.
|
|
Mostly found by gcc -Wtraditional, per "non-static declaration of ...
follows static declaration [-Wtraditional]" warnings.
|
|
The directive sets the server list of supported application protocols
and requires one of this protocols to be negotiated if client is using
ALPN.
|
|
The variable contains protocol selected by ALPN during handshake and
is empty otherwise.
|
|
To load old/weak server or client certificates it might be needed to adjust
the security level, as introduced in OpenSSL 1.1.0. This change ensures that
ciphers are set before loading the certificates, so security level changes
via the cipher string apply to certificate loading.
|
|
Sun C complains about "statement not reached" if a "return" is followed
by additional statements.
|
|
With the ssl_conf_command directive it is now possible to set
arbitrary OpenSSL configuration parameters as long as nginx is compiled
with OpenSSL 1.0.2 or later. Full list of available configuration
commands can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
In particular, this allows configuring PrioritizeChaCha option
(ticket #1445):
ssl_conf_command Options PrioritizeChaCha;
It can be also used to configure TLSv1.3 ciphers in OpenSSL,
which fails to configure them via the SSL_CTX_set_cipher_list()
interface (ticket #1529):
ssl_conf_command Ciphersuites TLS_CHACHA20_POLY1305_SHA256;
Configuration commands are applied after nginx own configuration
for SSL, so they can be used to override anything set by nginx.
Note though that configuring OpenSSL directly with ssl_conf_command
might result in a behaviour nginx does not expect, and should be
done with care.
|
|
|
|
If ngx_pool_cleanup_add() fails, we have to clean just created SSL context
manually, thus appropriate call added.
Additionally, ngx_pool_cleanup_add() moved closer to ngx_ssl_create() in
the ngx_http_ssl_module, to make sure there are no leaks due to intermediate
code.
|
|
OpenSSL 1.1.1 does not save server name to the session if server name
callback returns anything but SSL_TLSEXT_ERR_OK, thus breaking
the $ssl_server_name variable in resumed sessions.
Since $ssl_server_name can be used even if we've selected the default
server and there are no other servers, it looks like the only viable
solution is to always return SSL_TLSEXT_ERR_OK regardless of the actual
result.
To fix things in the stream module as well, added a dummy server name
callback which always returns SSL_TLSEXT_ERR_OK.
|
|
A virtual server may have no SSL context if it does not have certificates
defined, so we have to use config of the ngx_http_ssl_module from the
SSL context in the certificate callback. To do so, it is now passed as
the argument of the callback.
The stream module doesn't really need any changes, but was modified as
well to match http code.
|
|
Dynamic certificates re-introduce problem with incorrect session
reuse (AKA "virtual host confusion", CVE-2014-3616), since there are
no server certificates to generate session id context from.
To prevent this, session id context is now generated from ssl_certificate
directives as specified in the configuration. This approach prevents
incorrect session reuse in most cases, while still allowing sharing
sessions across multiple machines with ssl_session_ticket_key set as
long as configurations are identical.
|
|
|
|
In mail and stream modules, no certificate provided is a fatal condition,
much like with the "ssl" and "starttls" directives.
In http, "listen ... ssl" can be used in a non-default server without
certificates as long as there is a certificate in the default one, so
missing certificate is only fatal for default servers.
|
|
This fixes segfault in configurations with multiple virtual servers sharing
the same port, where a non-default virtual server block misses certificate.
|
|
This variable contains URL-encoded client SSL certificate. In contrast
to $ssl_client_cert, it doesn't depend on deprecated header continuation.
The NGX_ESCAPE_URI_COMPONENT variant of encoding is used, so the resulting
variable can be safely used not only in headers, but also as a request
argument.
The $ssl_client_cert variable should be considered deprecated now.
The $ssl_client_raw_cert variable will be eventually renambed back
to $ssl_client_cert.
|
|
No functional changes.
|
|
In http these checks were changed in a6d6d762c554, though mail module
was missed at that time. Since then, the stream module was introduced
based on mail, using "== NGX_ERROR" check.
|
|
With OpenSSL 1.1.0+, the workaround for handshake buffer size as introduced
in a720f0b0e083 (ticket #413) no longer works, as OpenSSL no longer exposes
handshake buffers, see https://github.com/openssl/openssl/commit/2e7dc7cd688.
Moreover, it is no longer possible to adjust handshake buffers at all now.
To avoid additional RTT if handshake uses more than 4k we now set TCP_NODELAY
on SSL connections before handshake. While this still results in sub-optimal
network utilization due to incomplete packets being sent, it seems to be
better than nothing.
|
|
Support for the TLSv1.3 protocol will be introduced in OpenSSL 1.1.1.
|
|
If ngx_stream_ssl_init_connection() succeeded immediately, the check was not
done.
The bug had appeared in 1.11.8 (41cb1b64561d).
|
|
A missing check could cause ngx_stream_ssl_handler() to be applied
to a non-ssl session, which resulted in a null pointer dereference
if ssl_verify_client is enabled.
The bug had appeared in 1.11.8 (41cb1b64561d).
|
|
New directives: "ssl_verify_client", "ssl_verify_depth",
"ssl_client_certificate", "ssl_trusted_certificate", and
"ssl_crl".
New variables: $ssl_client_cert, $ssl_client_raw_cert,
$ssl_client_s_dn, $ssl_client_i_dn, $ssl_client_serial,
$ssl_client_fingerprint, $ssl_client_verify, $ssl_client_v_start,
$ssl_client_v_end, and $ssl_client_v_remain.
|
|
The variable contains a list of curves as supported by the client.
Known curves are listed by their names, unknown ones are shown
in hex, e.g., "0x001d:prime256v1:secp521r1:secp384r1".
Note that OpenSSL uses session data for SSL_get1_curves(), and
it doesn't store full list of curves supported by the client when
serializing a session. As a result $ssl_curves is only available
for new sessions (and will be empty for reused ones).
The variable is only meaningful when using OpenSSL 1.0.2 and above.
With older versions the variable is empty.
|
|
The variable contains list of ciphers as supported by the client.
Known ciphers are listed by their names, unknown ones are shown
in hex, e.g., ""AES128-SHA:AES256-SHA:0x00ff".
The variable is fully supported only when using OpenSSL 1.0.2 and above.
With older version there is an attempt to provide some information
using SSL_get_shared_ciphers(). It only lists known ciphers though.
Moreover, as OpenSSL uses session data for SSL_get_shared_ciphers(),
and it doesn't store relevant data when serializing a session. As
a result $ssl_ciphers is only available for new sessions (and not
available for reused ones) when using OpenSSL older than 1.0.2.
|
|
|
|
|
|
|
|
This patch moves various OpenSSL-specific function calls into the
OpenSSL module and introduces ngx_ssl_ciphers() to make nginx more
crypto-library-agnostic.
|
