| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
The ssl configuration is obtained at config time and saved for future use.
|
|
The new "quic_stateless_reset_token_key" directive is added. It sets the
endpoint key used to generate stateless reset tokens and enables feature.
If the endpoint receives short-header packet that can't be matched to
existing connection, a stateless reset packet is generated with
a proper token.
If a valid stateless reset token is found in the incoming packet,
the connection is closed.
Example configuration:
http {
quic_stateless_reset_token_key "foo";
...
}
|
|
Found by Coverity (CID 1467637).
|
|
In 7717:e3e8b8234f05, the 1st bit was incorrectly used. It shouldn't
be used for bitmask values, as it is used by NGX_CONF_BITMASK_SET.
Additionally, special value "off" added to make it possible to clear
inherited userid_flags value.
|
|
|
|
|
|
This is in preparation for the next change.
Also, moved optimization from ngx_http_proxy_rewrite_regex_handler()
to ngx_http_proxy_rewrite().
|
|
The "false" parameter of the proxy_redirect directive is deprecated.
Warning has been emitted since c2230102df6f (0.7.54).
The "off" parameter of the proxy_redirect, proxy_cookie_domain, and
proxy_cookie_path directives tells nginx not to inherit the
configuration from the previous configuration level.
Previously, after specifying the directive with the "off" parameter,
any other directives were ignored, and syntax checking was disabled.
The syntax was enforced to allow either one directive with the "off"
parameter, or several directives with other parameters.
Also, specifying "proxy_redirect default foo" no longer works like
"proxy_redirect default".
|
|
Previously the default server configuration context was used until the
:authority or host header was parsed. This led to using the configuration
parameters like client_header_buffer_size or request_pool_size from the default
server rather than from the server selected by SNI.
Also, the switch to the right server log is implemented. This issue manifested
itself as QUIC stream being logged to the default server log until :authority
or host is parsed.
|
|
Initially, client certificate verification didn't work due to the missing
hc->ssl on a QUIC stream, which is started to be set in 7738:7f0981be07c4.
Then it was lost in 7999:0d2b2664b41c introducing "quic" listen parameter.
This change re-adds hc->ssl back for all QUIC connections, similar to SSL.
|
|
The new code looks simpler and is similar to other checks.
|
|
Request body discard is disabled for QUIC streams anyway.
|
|
As per HTTP/3 draft 30, section 7.2.8:
Frame types that were used in HTTP/2 where there is no corresponding
HTTP/3 frame have also been reserved (Section 11.2.1). These frame
types MUST NOT be sent, and their receipt MUST be treated as a
connection error of type H3_FRAME_UNEXPECTED.
|
|
In rare cases, such as memory allocation failure, SSL_set_SSL_CTX() returns
NULL, which could mean that a different SSL configuration has not been set.
Note that this new behaviour seemingly originated in OpenSSL-1.1.0 release.
|
|
HTTP/2 code failed to run posted requests after calling the request body
handler, and this resulted in connection hang if a subrequest was created
in the body handler and no other actions were made.
|
|
If 400 errors were redirected to an upstream server using the error_page
directive, DATA frames from the client might cause segmentation fault
due to null pointer dereference. The bug had appeared in 6989:2c4dbcd6f2e4
(1.13.0).
Fix is to skip such frames in ngx_http_v2_state_read_data() (similarly
to 7561:9f1f9d6e056a). With the fix, behaviour of 400 errors in HTTP/2
is now similar to one in HTTP/1.x, that is, nginx doesn't try to read the
request body.
Note that proxying 400 errors, as well as other early stage errors, to
upstream servers might not be a good idea anyway. These errors imply
that reading and processing of the request (and the request headers)
wasn't complete, and proxying of such incomplete request might lead to
various errors.
Reported by Chenglong Zhang.
|
|
If the variant hash doesn't match one we used as a secondary cache key,
we switch back to the original key. In this case, c->body_start was kept
updated from an existing cache node overwriting the new response value.
After file cache update, it led to discrepancy between a cache node and
cache file seen as critical errors "file cache .. has too long header".
|
|
As per HTTP/3 draft 29, section 4.1:
Frames of unknown types (Section 9), including reserved frames
(Section 7.2.8) MAY be sent on a request or push stream before,
after, or interleaved with other frames described in this section.
Also, trailers frame is now used as an indication of the request body end.
|
|
While for HTTP/1 unexpected eof always means an error, for HTTP/3 an eof right
after a DATA frame end means the end of the request body. For this reason,
since adding HTTP/3 support, eof no longer produced an error right after recv()
but was passed to filters which would make a decision. This decision was made
in ngx_http_parse_chunked() and ngx_http_v3_parse_request_body() based on the
b->last_buf flag.
Now that since 0f7f1a509113 (1.19.2) rb->chunked->length is a lower threshold
for the expected number of bytes, it can be set to zero to indicate that more
bytes may or may not follow. Now it's possible to move the check for eof from
parser functions to ngx_http_request_body_chunked_filter() and clean up the
parsing code.
Also, in the default branch, in case of eof, the following three things
happened, which were replaced with returning NGX_ERROR while implementing
HTTP/3:
- "client prematurely closed connection" message was logged
- c->error flag was set
- NGX_HTTP_BAD_REQUEST was returned
The change brings back this behavior for HTTP/1 as well as HTTP/3.
|
|
The "Literal Header Field Never Indexed" header field representation is not
used in HTTP/2, and it makes little sense to make a distinction in HTTP/3.
|
|
As per HTTP/3 draft 29, section 4.1:
When the server does not need to receive the remainder of the request,
it MAY abort reading the request stream, send a complete response, and
cleanly close the sending part of the stream.
|
|
The function ngx_http_upstream_check_broken_connection() terminates the HTTP/1
request if client sends eof. For QUIC (including HTTP/3) the c->write->error
flag is now checked instead. This flag is set when the entire QUIC connection
is closed or STOP_SENDING was received from client.
|
|
Previously the request body DATA frame header was read by one byte because
filters were called only when the requested number of bytes were read. Now,
after 08ff2e10ae92 (1.19.2), filters are called after each read. More bytes
can be read at once, which simplifies and optimizes the code.
This also reduces diff with the default branch.
|
|
|
|
|
|
Sending shutdown when ngx_http_test_reading() detects the connection is
closed can result in "SSL_shutdown() failed (SSL: ... bad write retry)"
critical log messages if there are blocked writes.
Fix is to avoid sending shutdown via the c->ssl->no_send_shutdown flag,
similarly to how it is done in ngx_http_keepalive_handler() for kqueue
when pending EOF is detected.
Reported by Jan Prachař
(http://mailman.nginx.org/pipermail/nginx-devel/2018-December/011702.html).
|
|
Without the flag, SSL shutdown is attempted on such connections,
resulting in useless work and/or bogus "SSL_shutdown() failed
(SSL: ... bad write retry)" critical log messages if there are
blocked writes.
|
|
If there is a previous buffer, copy small chunks into it instead of
allocating additional buffer.
|
|
If some additional data from a pipelined request happens to be
read into the body buffer, we copy it to r->header_in or allocate
an additional large client header buffer for it.
|
|
This is a prerequisite for the next change to allow large reads
on chunk boundaries.
|
|
This ensures that copying won't write more than the buffer size
even if the buffer comes from hc->free and it is smaller than the large
client header buffer size in the virtual host configuration. This might
happen if size of large client header buffers is different in name-based
virtual hosts, similarly to the problem with number of buffers fixed
in 6926:e662cbf1b932.
|
|
Previously this function generated an error trying to figure out if client shut
down the write end of the connection. The reason for this error was that a
QUIC stream has no socket descriptor. However checking for eof is not the
right thing to do for an HTTP/3 QUIC stream since HTTP/3 clients are expected
to shut down the write end of the stream after sending the request.
Now the function handles QUIC streams separately. It checks if c->read->error
is set. The error flags for c->read and c->write are now set for all streams
when closing the QUIC connection instead of setting the pending_eof flag.
|
|
After 05e42236e95b (1.19.1) responses with extra data might result in
zero size buffers being generated and "zero size buf" alerts in writer
(if f->rest happened to be 0 when processing additional stdout data).
|
|
New directives are added:
- http3_max_concurrent_pushes
- http3_push
- http3_push_preload
|
|
Also, ngx_quic_create_uni_stream() is replaced with
ngx_quic_open_stream() which is capable of creating a bidi stream.
|
|
Previously, the document generated by the xslt filter was always fully sent
to client even if a range was requested and response status was 206 with
appropriate Content-Range.
The xslt module is unable to serve a range because of suspending the header
filter chain. By the moment full response xml is buffered by the xslt filter,
range header filter is not called yet, but the range body filter has already
been called and did nothing.
The fix is to disable ranges by resetting the r->allow_ranges flag much like
the image filter that employs a similar technique.
|
|
Now it holds "HTTP/3.0". Previously it was empty.
|
|
Plus a few other minor style changes.
|
|
Now they are similar to HTTP/2 where they are called h2scf.
|
|
The file contains only encoding functions.
|
|
Even though typically frame ids fit into a single byte, calling
ngx_http_v3_encode_varlen_int() adds to the code clarity.
|
|
|
|
|
|
Previously, this triggered an alert "shutdown() failed" in error log.
|
|
Now c->listening->handler() is called instead.
|
|
Also, introduced ngx_stream_quic_module.
|
|
The parameter allows processing HTTP/0.9-2 over QUIC.
Also, introduced ngx_http_quic_module and moved QUIC settings there
|
|
|
|
|
