| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
In current versions (all versions based on zlib 1.2.11, at least
since 2018) it no longer uses 64K hash and does not force window
bits to 13 if it is less than 13. That is, it needs just 16 bytes
more memory than normal zlib, so these bytes are simply added to
the normal size calculation.
|
|
|
|
In limit_req, auth_delay, and upstream code to check for broken
connections, tests for possible connection close by the client
did not work if the connection was already closed when relevant
event handler was set. This happened because there were no additional
events in case of edge-triggered event methods, and read events
were disabled in case of level-triggered ones.
Fix is to explicitly post a read event if the c->read->ready flag
is set.
|
|
For connection close to be reported with eventport on Solaris,
ngx_handle_read_event() needs to be called.
|
|
For new data to be reported with eventport on Solaris,
ngx_handle_read_event() needs to be called after reading response
headers. To do so, ngx_http_upstream_process_non_buffered_upstream()
now called unconditionally if there are no prepread data. This
won't cause any read() syscalls as long as upstream connection
is not ready for reading (c->read->ready is not set), but will result
in proper handling of all events.
|
|
Without explicit handling, a zero timer was actually added, leading to
multiple unneeded syscalls. Further, sending GOAWAY frame early might
be beneficial for clients.
Reported by Sergey Kandaurov.
|
|
Unlike in 75e908236701, which added the logic to ngx_http_finalize_request(),
this change moves it to a more generic routine ngx_http_finalize_connection()
to cover cases when a request is finalized with NGX_DONE.
In particular, this fixes unwanted connection transition into the keepalive
state after receiving EOF while discarding request body. With edge-triggered
event methods that means the connection will last for extra seconds as set in
the keepalive_timeout directive.
|
|
The response size check introduced in 39501ce97e29 did not take into
account possible padding on DATA frames, resulting in incorrect
"upstream sent response body larger than indicated content length" errors
if upstream server used padding in responses with known length.
Fix is to check the actual size of response buffers produced by the code,
similarly to how it is done in other protocols, instead of checking
the size of DATA frames.
Reported at:
http://mailman.nginx.org/pipermail/nginx-devel/2021-March/013907.html
|
|
|
|
Previously, the value was always "1".
|
|
The maximum number of HTTP/3 unidirectional client streams we can handle is 3:
control, decode and encode. These streams are never closed.
|
|
This timeout limits the time when no client request streams exist.
|
|
The function ngx_quic_shutdown_connection() waits until all non-cancelable
streams are closed, and then closes the connection. In HTTP/3 cancelable
streams are all unidirectional streams except push streams.
The function is called from HTTP/3 when client reaches keepalive_requests.
|
|
The last request in connection is determined according to the keepalive_requests
directive. Requests beyond keepalive_requests are rejected.
|
|
Fixes interop with quic-go that doesn't send MAX_PUSH_ID.
|
|
It was an agreement to use "hq-interop"[1] for interoperability testing.
[1] https://github.com/quicwg/base-drafts/wiki/ALPN-IDs-used-with-QUIC
|
|
|
|
|
|
Sun C complains about "statement not reached" if a "return" is followed
by additional statements.
|
|
|
|
With this change, behaviour of HTTP/2 becomes even closer to HTTP/1.x,
and client_header_timeout instead of keepalive_timeout is used before
the first request is received.
This fixes HTTP/2 connections being closed even before the first request
if "keepalive_timeout 0;" was used in the configuration; the problem
appeared in f790816a0e87 (1.19.7).
|
|
The limit is the size of all large client header buffers. Client header size
is the total size of all client header names and values.
|
|
The structure is used to parse an HTTP/3 request. An object of this type is
added to ngx_http_request_t instead of h3_parse generic pointer.
Also, the new field is located outside of the request ephemeral zone to keep it
safe after request headers are parsed.
|
|
Instead, size of one large_client_header_buffers buffer is used.
|
|
|
|
Instead, size of one large_client_header_buffers buffer and all large
client header buffers are used.
|
|
Previously, PINGs and other frames extended possible keepalive time,
making it possible to keep an open HTTP/2 connection for a long time.
Now the connection is always closed as long as keepalive_timeout expires,
similarly to how it happens in HTTP/1.x.
Note that as a part of this change, incomplete frames are no longer
trigger a separate timeout, so http2_recv_timeout (replaced by
client_header_timeout in previous patches) is essentially cancelled.
The client_header_timeout is, however, used for SSL handshake and
while reading HEADERS frames.
|
|
Instead, keepalive_timeout and keepalive_requests are now used. This
is expected to simplify HTTP/2 code and usage. This also matches
directives used by upstream module for all protocols.
In case of default settings, this effectively changes maximum number
of requests per connection from 1000 to 100. This looks acceptable,
especially given that HTTP/2 code now properly supports lingering close.
Further, this changes default keepalive timeout in HTTP/2 from 300 seconds
to 75 seconds. This also looks acceptable, and larger than PING interval
used by Firefox (network.http.spdy.ping-threshold defaults to 58s),
the only browser to use PINGs.
|
|
Instead, the client_header_timeout is now used for HTTP/2 reading.
Further, the timeout is changed to be set once till no further data
left to read, similarly to how client_header_timeout is used in other
places.
|
|
The spdy_* directives are not available since introduction of HTTP/2 module
in nginx 1.9.5 more than five years ago.
|
|
New connections are marked reusable by ngx_http_init_connection() if there
are no data available for reading. As a result, if SSL is not used,
ngx_http_v2_init() might be called when the connection is marked reusable.
If a HEADERS frame is immediately available for reading, this resulted
in connection being preserved in reusable state with an active request,
and possibly closed later as if during worker shutdown (that is, after
all active requests were finalized).
Fix is to explicitly mark connections non-reusable in ngx_http_v2_init()
instead of (incorrectly) assuming they are already non-reusable.
Found by Sergey Kandaurov.
|
|
Prodded by Taewoo Kim.
|
|
This is particularly important in HTTP/2, where keepalive connections
are closed with lingering. Before the patch, reusing a keepalive HTTP/2
connection resulted in the connection waiting for lingering close to
remain in the reusable connections queue, preventing ngx_drain_connections()
from closing additional connections.
The patch fixes it by marking the connection reusable again, and so
moving it in the reusable connections queue. Further, it makes actually
possible to reuse such connections if needed.
|
|
The token generation in QUIC is reworked. Single host key is used to generate
all required keys of needed sizes using HKDF.
The "quic_stateless_reset_token_key" directive is removed. Instead, the
"quic_host_key" directive is used, which reads key from file, or sets it
to random bytes if not specified.
|
|
The flag is used in ngx_http_finalize_connection() to switch client connection
to the keepalive mode. Since eaea7dac3292 this code is not executed for HTTP/3
which allows us to revert the change and get back to the default branch code.
|
|
|
|
This part somehow slipped away from c5840ca2063d.
While it is not expected to be needed in case of lingering close,
it is good to keep it for correctness (see 2b5528023f6b).
|
|
The function has not been updated with introduction of trailers support
in 7034:1b068a4e82d8 (1.13.2).
|
|
The change reduces diff to the default branch for
src/http/ngx_http_request_body.c.
Also, client Content-Length, if present, is now checked against the real body
size sent by client.
|
|
Previously, quic connection object was created when Retry packet was sent.
This is neither necessary nor convenient, and contradicts the idea of retry:
protecting from bad clients and saving server resources.
Now, the connection is not created, token is verified cryptographically
instead of holding it in connection.
|
|
This function should be called at the end of an event handler to prepare the
event for the next handler call. Particularly, the "active" flag is set or
cleared depending on data availability.
With this call missing in one code path, read handler was not called again
after handling the initial part of the client request, if the request was too
big to fit into a single STREAM frame.
Now ngx_handle_read_event() is called in this code path. Also, read timer is
restarted.
|
|
Keeping post_accept_timeout in ngx_listening_t is no longer needed since
we've switched to 1 second timeout for deferred accept in 5541:fdb67cfc957d.
Further, using it in HTTP code can result in client_header_timeout being
used from an incorrect server block, notably if address-specific virtual
servers are used along with a wildcard listening socket, or if we've switched
to a different server block based on SNI in SSL handshake.
|
|
The stub status module and ngx_http_send_response() (used by the empty gif
module and the "return" directive) incorrectly assumed that responding
to HEAD requests always results in r->header_only being set. This is not
true, and results in incorrect behaviour, for example, in the following
configuration:
location / {
image_filter size;
return 200 test;
}
Fix is to remove this incorrect micro-optimization from both stub status
module and ngx_http_send_response().
Reported by Chris Newton.
|
|
After 7675:9afa45068b8f and 7678:bffcc5af1d72 (1.19.1), during non-buffered
simple proxying, responses with extra data might result in zero size buffers
being generated and "zero size buf" alerts in writer. This bug is similar
to the one with FastCGI proxying fixed in 7689:da8d758aabeb.
In non-buffered mode, normally the filter function is not called if
u->length is already 0, since u->length is checked after each call of
the filter function. There is a case when this can happen though: if
the response length is 0, and there are pre-read response body data left
after reading response headers. As such, a check for u->length is needed
at the start of non-buffered filter functions, similar to the one
for p->length present in buffered filter functions.
Appropriate checks added to the existing non-buffered copy filters
in the upstream (used by scgi and uwsgi proxying) and proxy modules.
|
|
The ngx_http_set_lingering_close() function is not called for HTTP/3.
The change reduces diff to the default branch.
|
|
A header with the name containing null, CR, LF, colon or uppercase characters,
is now considered an error. A header with the value containing null, CR or LF,
is also considered an error.
Also, header is considered invalid unless its name only contains lowercase
characters, digits, minus and optionally underscore. Such header can be
optionally ignored.
|
|
|
|
- :method, :path and :scheme are expected exactly once and not empty
- :method and :scheme character validation is added
- :authority cannot appear more than once
|
