| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
The directive enables usage of UDP segmentation offloading by quic.
By default, gso is disabled since it is not always operational when
detected (depends on interface configuration).
|
|
|
|
Renamed header -> field per quic-qpack naming convention, in particular:
- Header Field -> Field Line
- Header Block -> (Encoded) Field Section
- Without Name Reference -> With Literal Name
- Header Acknowledgement -> Section Acknowledgment
|
|
As per RFC 9000:
Values of 2^14 or greater are invalid.
|
|
Control characters (0x00-0x1f, 0x7f) and space are not expected to appear
in the Host header. Requests with such characters in the Host header are
now unconditionally rejected.
|
|
In 71edd9192f24 logging of invalid headers which were rejected with the
NGX_HTTP_PARSE_INVALID_HEADER error was restricted to just the "client
sent invalid header line" message, without any attempts to log the header
itself.
This patch returns logging of the header up to the invalid character and
the character itself. The r->header_end pointer is now properly set
in all cases to make logging possible.
The same logging is also introduced when parsing headers from upstream
servers.
|
|
Control characters (0x00-0x1f, 0x7f), space, and colon were never allowed in
header names. The only somewhat valid use is header continuation which nginx
never supported and which is explicitly obsolete by RFC 7230.
Previously, such headers were considered invalid and were ignored by default
(as per ignore_invalid_headers directive). With this change, such headers
are unconditionally rejected.
It is expected to make nginx more resilient to various attacks, in particular,
with ignore_invalid_headers switched off (which is inherently unsecure, though
nevertheless sometimes used in the wild).
|
|
Control characters (0x00-0x1f, 0x7f) were never allowed in URIs, and must
be percent-encoded by clients. Further, these are not believed to appear
in practice. On the other hand, passing such characters might make various
attacks possible or easier, despite the fact that currently allowed control
characters are not significant for HTTP request parsing.
|
|
From now on, requests with spaces in URIs are immediately rejected rather
than allowed. Spaces were allowed in 31e9677b15a1 (0.8.41) to handle bad
clients. It is believed that now this behaviour causes more harm than
good.
|
|
HTTP clients are not allowed to generate such requests since Transfer-Encoding
introduction in RFC 2068, and they are not expected to appear in practice
except in attempts to perform a request smuggling attack. While handling of
such requests is strictly defined, the most secure approach seems to reject
them.
|
|
No valid CONNECT requests are expected to appear within nginx, since it
is not a forward proxy. Further, request line parsing will reject
proper CONNECT requests anyway, since we don't allow authority-form of
request-target. On the other hand, RFC 7230 specifies separate message
length rules for CONNECT which we don't support, so make sure to always
reject CONNECTs to avoid potential abuse.
|
|
Previously, TRACE requests were rejected before parsing Transfer-Encoding.
This is not important since keepalive is not enabled at this point anyway,
though rejecting such requests after properly parsing other headers is
less likely to cause issues in case of further code changes.
|
|
After 2096b21fcd10, a single RST_STREAM(NO_ERROR) may not result in an error.
This change removes several unnecessary ctx->type checks for such a case.
|
|
Previously, once received from upstream, it couldn't limit
opening additional streams in a cached keepalive connection.
|
|
|
|
As per quic-http-34, these are the cases when this error should be generated:
If an endpoint receives a second SETTINGS frame
on the control stream, the endpoint MUST respond with a connection
error of type H3_FRAME_UNEXPECTED
SETTINGS frames MUST NOT be sent on any stream other than the control
stream. If an endpoint receives a SETTINGS frame on a different
stream, the endpoint MUST respond with a connection error of type
H3_FRAME_UNEXPECTED.
A client MUST NOT send a PUSH_PROMISE frame. A server MUST treat the
receipt of a PUSH_PROMISE frame as a connection error of type
H3_FRAME_UNEXPECTED; see Section 8.
The MAX_PUSH_ID frame is always sent on the control stream. Receipt
of a MAX_PUSH_ID frame on any other stream MUST be treated as a
connection error of type H3_FRAME_UNEXPECTED.
Receipt of an invalid sequence of frames MUST be treated as a
connection error of type H3_FRAME_UNEXPECTED; see Section 8. In
particular, a DATA frame before any HEADERS frame, or a HEADERS or
DATA frame after the trailing HEADERS frame, is considered invalid.
A CANCEL_PUSH frame is sent on the control stream. Receiving a
CANCEL_PUSH frame on a stream other than the control stream MUST be
treated as a connection error of type H3_FRAME_UNEXPECTED.
The GOAWAY frame is always sent on the control stream.
|
|
The quic-http-34 is ambiguous as to what error should be generated for the
first frame in control stream:
Each side MUST initiate a single control stream at the beginning of
the connection and send its SETTINGS frame as the first frame on this
stream. If the first frame of the control stream is any other frame
type, this MUST be treated as a connection error of type
H3_MISSING_SETTINGS.
If a DATA frame is received on a control stream, the recipient MUST
respond with a connection error of type H3_FRAME_UNEXPECTED.
If a HEADERS frame is received on a control stream, the recipient MUST
respond with a connection error of type H3_FRAME_UNEXPECTED.
Previously, H3_FRAME_UNEXPECTED had priority, but now H3_MISSING_SETTINGS has.
The arguments in the spec sound more compelling for H3_MISSING_SETTINGS.
|
|
Recent fixes to SSL shutdown with lingering close (554c6ae25ffc, 1.19.5)
broke logging of SSL variables. To make sure logging of SSL variables
works properly, avoid freeing c->ssl when doing an SSL shutdown before
lingering close.
Reported by Reinis Rozitis
(http://mailman.nginx.org/pipermail/nginx/2021-May/060670.html).
|
|
This is no longer needed after HTTP/3 request processing has moved
into its own function ngx_http_v3_process_header().
|
|
When starting processing a new encoder instruction, the header state is not
memzero'ed because generally it's burdensome. If the header value is empty,
this resulted in inserting a stale value left from the previous instruction.
Based on a patch by Zhiyong Sun.
|
|
To specify final protocol version by hand:
add_header Alt-Svc h3=":443";
|
|
|
|
Based on a patch by Zhiyong Sun.
|
|
The header is escaped in redirects based on request URI or
location name (auto redirect).
|
|
When variables are used in ssl_certificate or ssl_certificate_key, a request
is created in the certificate callback to evaluate the variables, and then
freed. Freeing it, however, updates c->log->action to "closing request",
resulting in confusing error messages like "client timed out ... while
closing request" when a client times out during the SSL handshake.
Fix is to restore c->log->action after calling ngx_http_free_request().
|
|
When using server push, a segfault occured because
ngx_http_v3_create_push_request() accessed ngx_http_v3_session_t object the old
way. Prior to 9ec3e71f8a61, HTTP/3 session was stored directly in c->data.
Now it's referenced by the v3_session field of ngx_http_connection_t.
|
|
|
|
This saves some memory in typical case when auth_basic_user_file is not
explicitly set, and unifies the code with alcf->realm.
|
|
With this change, it is now possible to use ngx_conf_merge_ptr_value()
to merge complex values. This change follows much earlier changes in
ngx_conf_merge_ptr_value() and ngx_conf_set_str_array_slot()
in 1452:cd586e963db0 (0.6.10) and 1701:40d004d95d88 (0.6.22), and the
change in ngx_conf_set_keyval_slot() (7728:485dba3e2a01, 1.19.4).
To preserve compatibility with existing 3rd party modules, both NULL
and NGX_CONF_UNSET_PTR are accepted for now.
|
|
Previously table had a separate cleanup handler.
|
|
Previously it was in ngx_http_v3_streams.c, but it's unrelated to streams.
|
|
|
|
Previously it was parsed in ngx_http_v3_streams.c, while the streams were
parsed in ngx_http_v3_parse.c. Now all parsing is done in one file. This
simplifies parsing API and cleans up ngx_http_v3_streams.c.
|
|
The functions are renamed to ngx_http_v3_send_XXX() similar to
ngx_http_v3_send_settings() and ngx_http_v3_send_goaway().
|
|
|
|
Previously, an ngx_http_v3_connection_t object was created for HTTP/3 and
then assinged to c->data instead of the generic ngx_http_connection_t object.
Now a direct reference is added to ngx_http_connection_t, which is less
confusing and does not require a flag for http3.
|
|
It's used instead of accessing c->quic->parent->data directly. Apart from being
simpler, it allows to change the way session is stored in the future by changing
the macro.
|
|
|
|
Now ngx_http_v3_ack_header() and ngx_http_v3_inc_insert_count() always generate
decoder error. Our implementation does not use dynamic tables and does not
expect client to send Section Acknowledgement or Insert Count Increment.
Stream Cancellation, on the other hand, is allowed to be sent anyway. This is
why ngx_http_v3_cancel_stream() does not return an error.
|
|
Previously only non-empty frames were rejected.
|
|
7.2.1:
If a DATA frame is received on a control stream, the recipient MUST
respond with a connection error of type H3_FRAME_UNEXPECTED;
7.2.2:
If a HEADERS frame is received on a control stream, the recipient MUST
respond with a connection error (Section 8) of type H3_FRAME_UNEXPECTED.
|
|
Stop including QUIC headers with no user-serviceable parts inside.
This allows to provide a much cleaner QUIC interface. To cope with that,
ngx_quic_derive_key() is now explicitly exported for v3 and quic modules.
Additionally, this completely hides the ngx_quic_keys_t internal type.
|
|
It turns out no browsers implement HTTP/2 GOAWAY handling properly, and
large enough number of resources on a page results in failures to load
some resources. In particular, Chrome seems to experience errors if
loading of all resources requires more than 1 connection (while it
is usually able to retry requests at least once, even with 2 connections
there are occasional failures for some reason), Safari if loading requires
more than 3 connections, and Firefox if loading requires more than 10
connections (can be configured with network.http.request.max-attempts,
defaults to 10).
It does not seem to be possible to resolve this on nginx side, even strict
limiting of maximum concurrency does not help, and loading issues seems to
be triggered by merely queueing of a request for a particular connection.
The only available mitigation seems to use higher keepalive_requests value.
The new default is 1000 and matches previously used default for
http2_max_requests. It is expected to be enough for 99.98% of the pages
(https://httparchive.org/reports/state-of-the-web?start=latest#reqTotal)
even in Chrome.
|
|
|
|
Similar to lingering_time, it limits total connection lifetime before
keepalive is switched off. The default is 1 hour, which is close to
the total maximum connection lifetime possible with default
keepalive_requests and keepalive_timeout.
|
|
Firefox uses several idle streams for PRIORITY frames[1], and
"http2_max_concurrent_streams 1;" results in "client sent too many
PRIORITY frames" errors when a connection is established by Firefox.
Fix is to relax the PRIORITY frames limit to use at least 100 as
the initial value (which is the recommended by the HTTP/2 protocol
minimum limit on the number of concurrent streams, so it is not
unreasonable for clients to assume that similar number of idle streams
can be used for prioritization).
[1] https://hg.mozilla.org/mozilla-central/file/32a9e6e145d6e3071c3993a20bb603a2f388722b/netwerk/protocol/http/Http2Stream.cpp#l1270
|
|
|
|
|
|
|
