| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
Since an output buffer can only be used for either reading or sending, small
amounts of data left from the previous operation (due to some limits) must be
sent before nginx will be able to read further into the buffer. Using only
one output buffer can result in suboptimal behavior that manifests itself in
forming and sending too small chunks of data. This is particularly painful
with SPDY (or HTTP/2) where each such chunk needs to be prefixed with some
header.
The default flow-control window in HTTP/2 is 64k minus one bytes. With one
32k output buffer this results is one byte left after exhausting the window.
With two 32k buffers the data will be read into the second free buffer before
sending, thus the minimum output is increased to 32k + 1 bytes which is much
better.
|
|
It appears that the CONTINUATION frames don't need to be aligned to bounds of
individual headers.
|
|
|
|
If sub_filter directive was only specified at http{} level, sub filter
internal data remained uninitialized. That would lead to a crash in runtime.
|
|
The SPDY support is removed, as it's incompatible with the new module.
|
|
A configuration with a named location inside a zero-length prefix
or regex location used to trigger a segmentation fault, as
ngx_http_core_location() failed to properly detect if a nested location
was created. Example configuration to reproduce the problem:
location "" {
location @foo {}
}
Fix is to not rely on a parent location name length, but rather check
command type we are currently parsing.
Identical fix is also applied to ngx_http_rewrite_if(), which used to
incorrectly assume the "if" directive is on server{} level in such
locations.
Reported by Markus Linnala.
Found with afl-fuzz.
|
|
This prevents a potential attack that discloses cached data if an attacker
will be able to craft a hash collision between some cache key the attacker
is allowed to access and another cache key with protected data.
See http://mailman.nginx.org/pipermail/nginx-devel/2015-September/007288.html.
Thanks to Gena Makhomed and Sergey Brester.
|
|
The value of NGX_ERROR, returned from filter handlers, was treated as a generic
upstream error and changed to NGX_HTTP_INTERNAL_SERVER_ERROR before calling
ngx_http_finalize_request(). This resulted in "header already sent" alert
if header was already sent in filter handlers.
The problem appeared in 54e9b83d00f0 (1.7.5).
|
|
There is no much sense in such a big value since its semantics
has been changed in 06e850859a26 to limit recursive subrequests.
|
|
This overflow has become possible after the change in 06e850859a26,
since concurrent subrequests are not limited now and each of them is
counted in r->main->count.
|
|
|
|
When prototyping behavior is not explicitly specified, xsubpp emits
a message to stderr asking to do so (see ticket #608).
|
|
|
|
Resolved warnings about declarations that hide previous local declarations.
Warnings about WSASocketA() being deprecated resolved by explicit use of
WSASocketW() instead of WSASocket(). When compiling without IPv6 support,
WinSock deprecated warnings are disabled to allow use of gethostbyname().
|
|
|
|
|
|
The following configuration with alias, nested location and try_files
resulted in wrong file being used. Request "/foo/test.gif" tried to
use "/tmp//foo/test.gif" instead of "/tmp/test.gif":
location /foo/ {
alias /tmp/;
location ~ gif {
try_files $uri =405;
}
}
Additionally, rev. c985d90a8d1f introduced a regression if
the "/tmp//foo/test.gif" file was found (ticket #768). Resulting URI
was set to "gif?/foo/test.gif", as the code used clcf->name of current
location ("location ~ gif") instead of parent one ("location /foo/").
Fix is to use r->uri instead of clcf->name in all cases in the
ngx_http_core_try_files_phase() function. It is expected to be
already matched and identical to the clcf->name of the right
location.
|
|
If alias was used in a location given by a regular expression,
nginx used to do wrong thing in try_files if a location name (i.e.,
regular expression) was an exact prefix of URI. The following
configuration triggered a segmentation fault on a request to "/mail":
location ~ /mail {
alias /path/to/directory;
try_files $uri =404;
}
Reported by Per Hansson.
|
|
Iterating through all connections takes a lot of CPU time, especially
with large number of worker connections configured. As a result
nginx processes used to consume CPU time during graceful shutdown.
To mitigate this we now only do a full scan for idle connections when
shutdown signal is received.
Transitions of connections to idle ones are now expected to be
avoided if the ngx_exiting flag is set. The upstream keepalive module
was modified to follow this.
|
|
|
|
|
|
Such configurations have very limited use, introduce various problems and
are not officially supported.
|
|
The new name is consistent with the ngx_proxy_protocol_write function.
|
|
The function is now called ngx_parse_http_time(), and can be used by
any code to parse HTTP-style date and time. In particular, it will be
used for OCSP stapling.
For compatibility, a macro to map ngx_http_parse_time() to the new name
provided for a while.
|
|
|
|
|
|
|
|
This can be useful to understand why "no live upstreams" happens,
in particular.
|
|
When configured, an individual listen socket on a given address is
created for each worker process. This allows to reduce in-kernel lock
contention on configurations with high accept rates, resulting in better
performance. As of now it works on Linux and DragonFly BSD.
Note that on Linux incoming connection requests are currently tied up
to a specific listen socket, and if some sockets are closed, connection
requests will be reset, see https://lwn.net/Articles/542629/. With
nginx, this may happen if the number of worker processes is reduced.
There is no such problem on DragonFly BSD.
Based on previous work by Sepherosa Ziehau and Yingqi Lu.
|
|
There is no need to set "i" to 0, as it's expected to be 0 assuming
the bindings are properly sorted, and we already rely on this when
explicitly set hport->naddrs to 1. Remaining conditional code is
replaced with identical "hport->naddrs = i + 1".
Identical modifications are done in the mail and stream modules,
in the ngx_mail_optimize_servers() and ngx_stream_optimize_servers()
functions, respectively.
No functional changes.
|
|
|
|
The variable keeps time spent on establishing a connection with
the upstream server.
|
|
|
|
|
|
The http and stream versions of this macro were identical.
|
|
It's now enough to specify proxy_protocol option in one listen directive to
enable it in all servers listening on the same address/port. Previously,
the setting from the first directive was always used.
|
|
|
|
|
|
|
|
|
|
Now that peers are stored as a list, the weighted and unweighted
cases became nearly identical.
|
|
With 48b3d5ddfb03, it's possible to specify limit_req_zone after limit_req.
|
|
|
|
If a peer was initially skipped due to max_fails, there's no reason
not to try it again if enough time has passed, and the next_upstream
logic is in action.
This also reduces diffs with NGINX Plus.
|
|
Upstreams with the "zone" directive are kept in shared memory,
with a consistent view of all worker processes.
|
|
|
|
This is an API change.
|
|
This also simplifies the implementation of the least_conn module.
|
|
|
