| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If allocation of cleanup handler in the HTTP/2 header filter failed, then
a stream might be freed with a HEADERS frame left in the output queue.
Now the HEADERS frame is accounted in the queue before trying to allocate
the cleanup handler.
|
|
Abnormally exited workers may leave locked cache entries, this can
result in the cache size on disk exceeding max_size and shared memory
exhaustion.
This change mitigates the issue by ignoring locked entries during forced
expire. It also increases the visibility of the problem by logging such
entries.
|
|
Previously, an allocation error resulted in uninitialized memory access
when evaluating $upstream_http_ variables.
On a related note, see r->headers_out.headers cleanup work in 0cdee26605f3.
|
|
|
|
|
|
Found by gcc7 (-Wimplicit-fallthrough).
|
|
|
|
Particularly, this eliminates difference in behavior for requests without body
and deduplicates code.
Prodded by Piotr Sikora.
|
|
It's required by RFC 7540. While there is no real harm from such frames,
that should help to detect broken clients.
Based on a patch by Piotr Sikora.
|
|
|
|
If initialization of a header failed for some reason after ngx_list_push(),
leaving the header as is can result in uninitialized memory access by
the header filter or the log module. The fix is to clear partially
initialized headers in case of errors.
For the Cache-Control header, the fix is to postpone pushing
r->headers_out.cache_control until its value is completed.
|
|
Previously, ngx_http_sub_header_filter() could fail with a partially
initialized context, later accessed in ngx_http_sub_body_filter()
if called from the perl content handler.
The issue had appeared in 2c045e5b8291 (1.9.4).
A better fix would be to handle ngx_http_send_header() errors in
the perl module, though this doesn't seem to be easy enough.
|
|
Support for the TLSv1.3 protocol will be introduced in OpenSSL 1.1.1.
|
|
|
|
|
|
This change adds "http_429" parameter to "proxy_next_upstream" for
retrying rate-limited requests, and to "proxy_cache_use_stale" for
serving stale cached responses after being rate-limited.
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
|
|
This change adds reason phrase in status line and pretty response body
when "429" status code is used in "return", "limit_conn_status" and/or
"limit_req_status" directives.
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
|
|
|
|
When a slice subrequest was redirected to a new location, its context was lost.
After its completion, a new slice subrequest for the same slice was created.
This could lead to infinite loop. Now the slice module makes sure each slice
subrequest starts output with the slice context available.
|
|
Previously, if slice main request write handler was called while a slice
subrequest was running, a new subrequest for the same slice was started.
|
|
With post_action or subrequests, it is possible that the timer set for
wev->delayed will expire while the active subrequest write event handler
is not ready to handle this. This results in request hangs as observed
with limit_rate / sendfile_max_chunk and post_action (ticket #776) or
subrequests (ticket #1228).
Moving the handling to the connection event handler fixes the hangs observed,
and also slightly simplifies the code.
|
|
Much like in limit_req, use the wev->delayed flag to ensure proper handling
and interoperability with limit_rate.
|
|
Since limit_req uses connection's write event to delay request processing,
it can conflict with timers in other subrequests. In particular, even
if applied to an active subrequest, it can break things if wev->delayed
is already set (due to limit_rate or sendfile_max_chunk), since after
limit_req finishes the wev->delayed flag will be set and no timer will be
active.
Fix is to use the wev->delayed flag in limit_req as well. This ensures that
wev->delayed won't be set after limit_req finishes, and also ensures that
limit_req's timers will be properly handled by other subrequests if the one
delayed by limit_req is not active.
|
|
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
|
|
All streams in connection must be finalized before the connection
itself can be finalized and all related memory is freed. That's
not always possible on the current event loop iteration.
Thus when the last stream is finalized, it sets the special read
event handler ngx_http_v2_handle_connection_handler() and posts
the event.
Previously, this handler didn't check the connection state and
could call the regular event handler on a connection that was
already in finalization stage. In the worst case that could
lead to a segmentation fault, since some data structures aren't
supposed to be used during connection finalization. Particularly,
the waiting queue can contain already freed streams, so the
WINDOW_UPDATE frame received by that moment could trigger
accessing to these freed streams.
Now, the connection error flag is explicitly checked in
ngx_http_v2_handle_connection_handler().
|
|
In order to finalize stream the error flag is set on fake connection and
either "write" or "read" event handler is called. The read events of fake
connections are always ready, but it's not the case with the write events.
When the ready flag isn't set, the error flag can be not checked in some
cases and as a result stream isn't finalized. Now the ready flag is
explicilty set on write events for proper finalization in all cases.
|
|
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
|
|
Previously, flow control didn't account for padding in DATA frames,
which meant that its view of the world could drift from peer's view
by up to 256 bytes per received padded DATA frame, which could lead
to a deadlock.
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
|
|
Previously, its value included payloads and frame headers of HEADERS
and CONTINUATION frames.
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
|
|
Previously, its value accounted for payloads of HEADERS, CONTINUATION
and DATA frames, as well as frame headers of HEADERS and DATA frames,
but it didn't account for frame headers of CONTINUATION frames.
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
|
|
Previously, connection write handler was called, resulting in wake up
of the active subrequest. This change makes it possible to read data
in non-active subrequests as well. For example, this allows SSI to
process instructions in non-active subrequests earlier and start
additional subrequests if needed, reducing overall response time.
|
|
If the subrequest is already finalized, the handler set with aio_write
may still be used by sendfile in threads when using range requests
(see also e4c1f5b32868, and the original note in 9fd738b85fad). Calling
already finalized subrequest's r->write_event_handler in practice
results in request hang in some cases.
Fix is to trigger connection event handler if the subrequest was already
finalized.
|
|
If of.err is 0, it means that there was a memory allocation error
and no further logging and/or processing is needed. The of.failed
string can be only accessed if of.err is not 0.
|
|
Reported by Richard Stanway,
http://mailman.nginx.org/pipermail/nginx/2017-March/053296.html.
|
|
|
|
|
|
The ev->timedout flag is set on first timer expiration, and never reset
after it. Due to this the code to stop the timer when the timer was
canceled never worked (except in a very specific time frame immediately
after start), and the timer was always armed again. This essentially
resulted in a buffer flush at the end of an event loop iteration.
This behaviour actually seems to be better than just stopping the flush
timer for the whole shutdown, so it is preserved as is instead of fixing
the code to actually remove the timer. It will be further improved by
upcoming changes to preserve cancelable timers if there are other timers
blocking shutdown.
|
|
Most notably, this fixes possible buffer overflows if number of large
client header buffers in a virtual server is different from the one in
the default server.
Reported by Daniil Bondarev.
|
|
|
|
|
|
Cloned subrequests should inherit r->content_handler. This way they will
be able to use the same location configuration as the original request
if there are "if" directives in the configuration.
Without r->content_handler inherited, the following configuration tries
to access a static file in the update request:
location / {
set $true 1;
if ($true) {
# nothing
}
proxy_pass http://backend;
proxy_cache one;
proxy_cache_use_stale updating;
proxy_cache_background_update on;
}
See http://mailman.nginx.org/pipermail/nginx/2017-February/053019.html for
initial report.
|
|
|
|
With "proxy_ignore_client_abort off" (the default), upstream module changes
r->read_event_handler to ngx_http_upstream_rd_check_broken_connection().
If the handler is not cleared during upstream finalization, it can be
triggered later, causing unexpected effects, if, for example, a request
was redirected to a different location using error_page or X-Accel-Redirect.
In particular, it makes "proxy_ignore_client_abort on" non-working after
a redirection in a configuration like this:
location = / {
error_page 502 = /error;
proxy_pass http://127.0.0.1:8082;
}
location /error {
proxy_pass http://127.0.0.1:8083;
proxy_ignore_client_abort on;
}
It is also known to cause segmentation faults with aio used, see
http://mailman.nginx.org/pipermail/nginx-ru/2015-August/056570.html.
Fix is to explicitly set r->read_event_handler to ngx_http_block_reading()
during upstream finalization, similar to how it is done in the request body
reading code and in the limit_req module.
|
|
This allows to store larger ETag values for proxy_cache_revalidate,
including ones generated as SHA256, and cache responses with longer
Vary (ticket #826).
In particular, this fixes caching of Amazon S3 responses with CORS
enabled, which now use "Vary: Origin, Access-Control-Request-Headers,
Access-Control-Request-Method".
Cache version bumped accordingly.
|
|
Previously, slice subrequest location was selected based on request URI.
If request is then redirected to a new location, its context array is cleared,
making the slice module loose current slice range information. This lead to
broken output. Now subrequests with the NGX_HTTP_SUBREQUEST_CLONE flag are
created for slices. Such subrequests stay in the same location as the parent
request and keep the right slice context.
|
|
The directives enable cache updates in subrequests.
|
|
Previously, there was no way to enable the proxy_cache_use_stale behavior by
reading the backend response. Now, stale-while-revalidate and stale-if-error
Cache-Control extensions (RFC 5861) are supported. They specify, how long a
stale response can be used when a cache entry is being updated, or in case of
an error.
|
|
This is not really needed in practice, and causes excessive debug output
in some of our tests.
|
|
|
|
Previously, buffer size was not changed from the one saved during
initial ngx_ssl_create_connection(), even if the buffer itself was not
yet created. Fix is to change c->ssl->buffer_size in the SNI callback.
Note that it should be also possible to update buffer size even in non-SNI
virtual hosts as long as the buffer is not yet allocated. This looks
like an overcomplication though.
|
