| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
If the range includes two or more /16 networks and does
not start at the /16 boundary, the last subrange was not
removed (see 91cff7f97a50 for details).
|
|
|
|
Previously, in "ranges" mode when all added ranges were deleted,
the ctx.high.low[i] was left pointing to a temporary array.
|
|
Unlike $upstream_response_length that only counts the body size,
the new variable also counts the size of response header and data
received after switching protocols when proxying WebSockets.
|
|
|
|
If PCRE is disabled, captures were treated as normal variables in
ngx_http_script_compile(), while code calculating flushes array length in
ngx_http_compile_complex_value() did not account captures as variables.
This could lead to write outside of the array boundary when setting
last element to -1.
Found with AddressSanitizer.
|
|
It fixes potential connection leak if some unsent data was left in the SSL
buffer. Particularly, that could happen when a client canceled the stream
after the HEADERS frame has already been created. In this case no other
frames might be produced and the HEADERS frame alone didn't flush the buffer.
|
|
Now it returns NGX_AGAIN if there's still data to be sent.
|
|
Checking for return value of c->send_chain() isn't sufficient since there
are data can be left in the SSL buffer. Now the wew->ready flag is used
instead.
In particular, this fixed a connection leak in cases when all streams were
closed, but there's still some data to be sent in the SSL buffer and the
client forgot about the connection.
|
|
Particularly this fixes alerts on OS X and NetBSD systems when HTTP/2 is
configured over plain TCP sockets.
On these systems calling writev() with no data leads to EINVAL errors
being logged as "writev() failed (22: Invalid argument) while processing
HTTP/2 connection".
|
|
Previously, a stream could be closed by timeout if it was canceled
while its send window was exhausted.
|
|
It's useless to generate HEADERS if the stream has been canceled already.
|
|
Previously, if the worker process exited, GOAWAY was sent to connections in
idle state, but connections with active streams were closed without GOAWAY.
|
|
On non-aligned platforms, properly cast argument before left-shifting it in
ngx_http_v2_parse_uint32 that is used with u_char. Otherwise it propagates
to int to hold the value and can step over the sign bit. Usually, on known
compilers, this results in negation. Furthermore, a subsequent store into a
wider type, that is ngx_uint_t on 64-bit platforms, results in sign-extension.
In practice, this can be observed in debug log as a very large exclusive bit
value, when client sent PRIORITY frame with exclusive bit set:
: *14 http2 PRIORITY frame sid:5 on 1 excl:8589934591 weight:17
Found with UndefinedBehaviorSanitizer.
|
|
Found with UndefinedBehaviorSanitizer.
|
|
The macro was unused since 0.7.44.
|
|
Previously, when a buffer was processed by the sub filter, its final bytes
could be buffered by the filter even if they don't match any pattern.
This happened because the Boyer-Moore algorithm, employed by the sub filter
since b9447fc457b4 (1.9.4), matches the last characters of patterns prior to
checking other characters. If the last character is out of scope, initial
bytes of a potential match are buffered until the last character is available.
Now, after receiving a flush or recycled buffer, the filter performs
additional checks to reduce the number of buffered bytes. The potential match
is checked against the initial parts of all patterns. Non-matching bytes are
not buffered. This improves processing of a chunked response from upstream
by sending the entire chunks without buffering unless a partial match is found
at the end of a chunk.
|
|
No functional changes.
|
|
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
|
|
|
|
|
|
This patch moves various OpenSSL-specific function calls into the
OpenSSL module and introduces ngx_ssl_ciphers() to make nginx more
crypto-library-agnostic.
|
|
When the stream is terminated the HEADERS frame can still wait in the output
queue. This frame can't be removed and must be sent to the client anyway,
since HTTP/2 uses stateful compression for headers. So in order to postpone
closing and freeing memory of such stream the special close stream handler
is set to the write event. After the HEADERS frame is sent the write event
is called and the stream will be finally closed.
Some events like receiving a RST_STREAM can trigger the read handler of such
stream in closing state and cause unexpected processing that can result in
another attempt to finalize the request. To prevent it the read handler is
now set to ngx_http_empty_handler.
Thanks to Amazon.
|
|
There is no reason to add the "Content-Length: 0" header to a proxied request
without body if the header isn't presented in the original request.
Thanks to Amazon.
|
|
According to RFC 7540, an endpoint should not send more than one RST_STREAM
frame for any stream.
Also, now all the data frames will be skipped while termination.
|
|
The ngx_http_v2_finalize_connection() closes current stream, but that is an
invalid operation while processing unbuffered upload. This results in access
to already freed memory, since the upstream module sets a cleanup handler that
also finalizes the request.
|
|
|
|
|
|
Previously, the stream's window was kept zero in order to prevent a client
from sending the request body before it was requested (see 887cca40ba6a for
details). Until such initial window was acknowledged all requests with
data were rejected (see 0aa07850922f for details).
That approach revealed a number of problems:
1. Some clients (notably MS IE/Edge, Safari, iOS applications) show an error
or even crash if a stream is rejected;
2. This requires at least one RTT for every request with body before the
client receives window update and able to send data.
To overcome these problems the new directive "http2_body_preread_size" is
introduced. It sets the initial window and configures a special per stream
preread buffer that is used to save all incoming data before the body is
requested and processed.
If the directive's value is lower than the default initial window (65535),
as previously, all streams with data will be rejected until the new window
is acknowledged. Otherwise, no special processing is used and all requests
with data are welcome right from the connection start.
The default value is chosen to be 64k, which is bigger than the default
initial window. Setting it to zero is fully complaint to the previous
behavior.
|
|
|
|
Now, the module extracts optional port which may accompany an
IP address. This custom extension is introduced, among other
things, in order to facilitate logging of original client ports.
Addresses with ports are expected to be in the RFC 3986 format,
that is, with IPv6 addresses in square brackets. E.g.,
"X-Real-IP: [2001:0db8::1]:12345" sets client port ($remote_port)
to 12345.
|
|
Previously, when the client address was changed to the one from
the PROXY protocol header, the client port ($remote_port) was
reset to zero. Now the client port is also changed to the one
from the PROXY protocol header.
|
|
|
|
|
|
|
|
It's properly aligned and can hold any supported sockaddr.
|
|
|
|
Since 4fbef397c753 nginx rejects with the 400 error any attempts of
requesting different host over the same connection, if the relevant
virtual server requires verification of a client certificate.
While requesting hosts other than negotiated isn't something legal
in HTTP/1.x, the HTTP/2 specification explicitly permits such requests
for connection reuse and has introduced a special response code 421.
According to RFC 7540 Section 9.1.2 this code can be sent by a server
that is not configured to produce responses for the combination of
scheme and authority that are included in the request URI. And the
client may retry the request over a different connection.
Now this code is used for requests that aren't authorized in current
connection. After receiving the 421 response a client will be able
to open a new connection, provide the required certificate and retry
the request.
Unfortunately, not all clients currently are able to handle it well.
Notably Chrome just shows an error, while at least the latest version
of Firefox retries the request over a new connection.
|
|
OpenSSL 1.0.2+ allows configuring a curve list instead of a single curve
previously supported. This allows use of different curves depending on
what client supports (as available via the elliptic_curves extension),
and also allows use of different curves in an ECDHE key exchange and
in the ECDSA certificate.
The special value "auto" was introduced (now the default for ssl_ecdh_curve),
which means "use an internal list of curves as available in the OpenSSL
library used". For versions prior to OpenSSL 1.0.2 it maps to "prime256v1"
as previously used. The default in 1.0.2b+ prefers prime256v1 as well
(and X25519 in OpenSSL 1.1.0+).
As client vs. server preference of curves is controlled by the
same option as used for ciphers (SSL_OP_CIPHER_SERVER_PREFERENCE),
the ssl_prefer_server_ciphers directive now controls both.
|
|
|
|
Both minor and major versions are now limited to 999 maximum. In case of
r->http_minor, this limit is already implied by the code. Major version,
r->http_major, in theory can be up to 65535 with current code, but such
values are very unlikely to become real (and, additionally, such values
are not allowed by RFC 7230), so the same test was used for r->http_major.
|
|
|
|
|
|
When it's known that the kernel supports EPOLLRDHUP, there is no need in
additional recv() call to get EOF or error when the flag is absent in the
event generated by the kernel. A special runtime test is done at startup
to detect if EPOLLRDHUP is actually supported by the kernel because
epoll_ctl() silently ignores unknown flags.
With this knowledge it's now possible to drop the "ready" flag for partial
read. Previously, the "ready" flag was kept until the recv() returned EOF
or error. In particular, this change allows the lingering close heuristics
(which relies on the "ready" flag state) to actually work on Linux, and not
wait for more data in most cases.
The "available" flag is now used in the read event with the semantics similar
to the corresponding counter in kqueue.
|
|
|
|
|
|
The variable contains text representation based on random data, usable as
a unique request identifier.
|
|
This parameter lets binding the proxy connection to a non-local address.
Upstream will see the connection as coming from that address.
When used with $remote_addr, upstream will accept the connection from real
client address.
Example:
proxy_bind $remote_addr transparent;
|
|
In addition, errors occurred while setting bind address are no longer ignored.
|
