| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
The parameter has been deprecated since c851a2ed5ce8.
|
|
The directive used to set the value of the "max_udp_payload_size" transport
parameter. According to RFC 9000, Section 18.2, the value specifies the size
of buffer for reading incoming datagrams:
This limit does act as an additional constraint on datagram size in
the same way as the path MTU, but it is a property of the endpoint
and not the path; see Section 14. It is expected that this is the
space an endpoint dedicates to holding incoming packets.
Current QUIC implementation uses the maximum possible buffer size (65527) for
reading datagrams.
|
|
A QUIC connection is not usable yet at this early stage of spin up.
|
|
|
|
Now "listen" directve has a new "quic" parameter which enables QUIC protocol
for the address. Further, to enable HTTP/3, a new directive "http3" is
introduced. The hq-interop protocol is enabled by "http3_hq" as before.
Now application protocol is chosen by ALPN.
Previously used "http3" parameter of "listen" is deprecated.
|
|
Previously, there was no timeout for a request stream blocked on insert count,
which could result in infinite wait. Now client_header_timeout is set when
stream is first blocked.
|
|
Previously, stream was closed with NGX_HTTP_CLOSE. However, in a similar case
when recv() returns eof or error, status 400 is triggered.
|
|
Previously, start_time wasn't set for a new stream.
The fix is to derive it from the parent connection.
Also it's used to simplify tracking keepalive_time.
|
|
As per RFC 9204, section 3.2.2, a new entry can reference an entry in the
dynamic table that will be evicted when adding this new entry into the dynamic
table.
Previously, such inserts resulted in use-after-free since the old entry was
evicted before the insertion (ticket #2431). Now it's evicted after the
insertion.
This change fixes Insert with Name Reference and Duplicate encoder instructions.
|
|
Previously, keepalive timer was deleted in ngx_http_v3_wait_request_handler()
and set in request cleanup handler. This worked for HTTP/3 connections, but not
for hq connections. Now keepalive timer is deleted in
ngx_http_v3_init_request_stream() and set in connection cleanup handler,
which works both for HTTP/3 and hq.
|
|
It's called after handshake completion or prior to the first early data stream
creation. The callback should initialize application-level data before
creating streams.
HTTP/3 callback implementation sets keepalive timer and sends SETTINGS.
Also, this allows to limit max handshake time in ngx_http_v3_init_stream().
|
|
ngx_http_v3_init() is renamed ngx_http_v3_init_stream().
ngx_http_v3_reset_connection() is renamed to ngx_http_v3_reset_stream().
|
|
All these events are created in context of a client connection and are deleted
when the connection is closed. Setting ev->cancelable could trigger premature
connection closure and a socket leak alert.
|
|
Now main QUIC connection for HTTP/3 always has c->idle flag set. This allows
the connection to receive worker shutdown notification. It is passed to
application level via a new conf->shutdown() callback.
The HTTP/3 shutdown callback sends GOAWAY to client and gracefully shuts down
the QUIC connection.
|
|
The change removes hq-specific request handler. Now hq requests are handled
by the HTTP/3 request handler.
|
|
The connection is automatically switched to this mode by transport layer when
there are no non-cancelable streams. Currently, cancelable streams are
HTTP/3 encoder/decoder/control streams.
|
|
|
|
Previously, HTTP/3 stream connection didn't inherit the servername regex
from the main QUIC connection saved when processing SNI and using regular
expressions in server names. As a result, it didn't execute to set regex
captures when choosing the virtual server while parsing HTTP/3 headers.
|
|
When client DATA frame header and its content come in different QUIC packets,
it may happen that only the header is processed by the first
ngx_http_v3_request_body_filter() call. In this case an empty request body
buffer is added to r->request_body->bufs, which is later reused in a
subsequent ngx_http_v3_request_body_filter() call without being removed from
the body chain. As a result, rb->request_body->bufs ends up with two copies of
the same buffer.
The fix is to avoid adding empty request body buffers to r->request_body->bufs.
|
|
|
|
|
|
RFC 9204 explicitly requires that.
|
|
Now ngx_quic_stream_t is decoupled from ngx_connection_t in a way that it
can persist after connection is closed by application. During this period,
server is expecting stream final size from client for correct flow control.
Also, buffered output is sent to client as more flow control credit is granted.
|
|
Previously, closure detection for server-initiated uni streams was not properly
implemented. Instead, HTTP/3 code relied on QUIC code posting the read event
and setting rev->error when it needed to close the stream. Then, regular
uni stream read handler called c->recv() and received error, which closed the
stream. This was an ad-hoc solution. If, for whatever reason, the read
handler was called earlier, c->recv() would return 0, which would also close
the stream.
Now server-initiated uni streams have a separate read event handler for
tracking stream closure. The handler calls c->recv(), which normally returns
0, but may return error in case of closure.
|
|
Sending the instruction is delayed until the end of the current event cycle.
Delaying the instruction is allowed by quic-qpack-21, section 2.2.2.3.
The goal is to reduce the amount of data sent back to client by accumulating
several inserts in one instruction and sometimes not sending the instruction at
all, if Section Acknowledgement was sent just before it.
|
|
Operations like ngx_quic_open_stream(), ngx_http_quic_get_connection(),
ngx_http_v3_finalize_connection(), ngx_http_v3_shutdown_connection() used to
receive a QUIC stream connection. Now they can receive the main QUIC
connection as well. This is useful when calling them from a stream context.
|
|
|
|
The directive sets corresponding transport parameter and limits number of
created client ids.
|
|
As per draft-ietf-quic-http, 4.1.1.2, and similar to HTTP/2 specification,
they ought to be concatenated. This closely follows ngx_http_v2_module.
|
|
|
|
|
|
|
|
ngx_http_v3_tables.h and ngx_http_v3_tables.c are renamed to
ngx_http_v3_table.h and ngx_http_v3_table.c to better match HTTP/2 code.
ngx_http_v3_streams.h and ngx_http_v3_streams.c are renamed to
ngx_http_v3_uni.h and ngx_http_v3_uni.c to better match their content.
|
|
Directives that set transport parameters are removed from the configuration.
Corresponding values are derived from the quic configuration or initialized
to default. Whenever possible, quic configuration parameters are taken from
higher-level protocol settings, i.e. HTTP/3.
|
|
A new variable $http3 is added. The variable equals to "h3" for HTTP/3
connections, "hq" for hq connections and is an empty string otherwise.
The variable $quic is eliminated.
The new variable is similar to $http2 variable.
|
|
Listen quic parameter is no longer supported.
|
|
|
|
|
|
As per quic-qpack-21:
When a stream is reset or reading is abandoned, the decoder emits a
Stream Cancellation instruction.
Previously the instruction was not sent. Now it's sent when closing QUIC
stream connection if dynamic table capacity is non-zero and eof was not
received from client. The latter condition means that a trailers section
may still be on its way from client and the stream needs to be cancelled.
|
|
A QUIC stream connection is treated as reusable until first bytes of request
arrive, which is also when the request object is now allocated. A connection
closed as a result of draining, is reset with the error code
H3_REQUEST_REJECTED. Such behavior is allowed by quic-http-34:
Once a request stream has been opened, the request MAY be cancelled
by either endpoint. Clients cancel requests if the response is no
longer of interest; servers cancel requests if they are unable to or
choose not to respond.
When the server cancels a request without performing any application
processing, the request is considered "rejected." The server SHOULD
abort its response stream with the error code H3_REQUEST_REJECTED.
The client can treat requests rejected by the server as though they had
never been sent at all, thereby allowing them to be retried later.
|
|
When an HTTP/3 function returns an error in context of a QUIC stream, it's
this function's responsibility now to finalize the entire QUIC connection
with the right code, if required. Previously, QUIC connection finalization
could be done both outside and inside such functions. The new rule follows
a similar rule for logging, leads to cleaner code, and allows to provide more
details about the error.
While here, a few error cases are no longer treated as fatal and QUIC connection
is no longer finalized in these cases. A few other cases now lead to
stream reset instead of connection finalization.
|
|
With this patch, all traffic over HTTP/3 bidi and uni streams is counted in
the h3c->total_bytes field, and payload traffic is counted in the
h3c->payload_bytes field. As long as total traffic is many times larger than
payload traffic, we consider this to be a flood.
Request header traffic is counted as if all fields are literal. Response
header traffic is counted as is.
|
|
Previously, when request was blocked, r->request_length was not updated.
|
|
Dynamic tables are not used when generating responses anyway.
|
|
Unlike in HTTP/2, both "host" and ":authority" reside in r->headers_in.server.
|
|
See details for HTTP/2 fix in 8b0553239592 for a complete description.
|
|
Previously the counter was not incremented for HTTP/3 streams, but still
decremented in ngx_http_close_connection(). There are two solutions here, one
is to increment the counter for HTTP/3 streams, and the other one is not to
decrement the counter for HTTP/3 streams. The latter solution looks
inconsistent with ngx_stat_reading/ngx_stat_writing, which are incremented on a
per-request basis. The change adds ngx_stat_active increment for HTTP/3
request and push streams.
|
|
Previously request could be finalized twice. For example, this could happen
if "Host" header was invalid.
|
