| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Also, connection migration within a single worker is implemented.
|
|
Previously, a version based on NGX_QUIC_DRAFT_VERSION was always set.
Now it is taken from the negotiated QUIC version that may differ.
|
|
|
|
Now "s", "V", and "v" format specifiers may be prefixed with "x" (lowercase)
or "X" (uppercase) to output corresponding data in hexadecimal format.
In collaboration with Maxim Dounin.
|
|
In some cases it might be needed to reject SSL handshake based on SNI
server name provided, for example, to make sure an invalid certificate
is not returned to clients trying to contact a name-based virtual server
without SSL configured. Previously, a "ssl_ciphers aNULL;" was used for
this. This workaround, however, is not compatible with TLSv1.3, in
particular, when using BoringSSL, where it is not possible to configure
TLSv1.3 ciphers at all.
With this change, the ssl_reject_handshake directive is introduced,
which instructs nginx to reject SSL handshakes with an "unrecognized_name"
alert in a particular server block.
For example, to reject handshake with names other than example.com,
one can use the following configuration:
server {
listen 443 ssl;
ssl_reject_handshake on;
}
server {
listen 443 ssl;
server_name example.com;
ssl_certificate example.com.crt;
ssl_certificate_key example.com.key;
}
The following configuration can be used to reject all SSL handshakes
without SNI server name provided:
server {
listen 443 ssl;
ssl_reject_handshake on;
}
server {
listen 443 ssl;
server_name ~^;
ssl_certificate example.crt;
ssl_certificate_key example.key;
}
Additionally, the ssl_reject_handshake directive makes configuring
certificates for the default server block optional. If no certificates
are configured in the default server for a given listening socket,
certificates must be defined in all non-default server blocks with
the listening socket in question.
|
|
Similarly to ssl_conf_command, proxy_ssl_conf_command (grpc_ssl_conf_command,
uwsgi_ssl_conf_command) can be used to set arbitrary OpenSSL configuration
parameters as long as nginx is compiled with OpenSSL 1.0.2 or later,
when connecting to upstream servers with SSL. Full list of available
configuration commands can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
|
|
With the ssl_conf_command directive it is now possible to set
arbitrary OpenSSL configuration parameters as long as nginx is compiled
with OpenSSL 1.0.2 or later. Full list of available configuration
commands can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
In particular, this allows configuring PrioritizeChaCha option
(ticket #1445):
ssl_conf_command Options PrioritizeChaCha;
It can be also used to configure TLSv1.3 ciphers in OpenSSL,
which fails to configure them via the SSL_CTX_set_cipher_list()
interface (ticket #1529):
ssl_conf_command Ciphersuites TLS_CHACHA20_POLY1305_SHA256;
Configuration commands are applied after nginx own configuration
for SSL, so they can be used to override anything set by nginx.
Note though that configuring OpenSSL directly with ssl_conf_command
might result in a behaviour nginx does not expect, and should be
done with care.
|
|
With this change, it is now possible to use ngx_conf_merge_ptr_value()
to merge keyval arrays. This change actually follows much earlier
changes in ngx_conf_merge_ptr_value() and ngx_conf_set_str_array_slot()
in 1452:cd586e963db0 (0.6.10) and 1701:40d004d95d88 (0.6.22).
To preserve compatibility with existing 3rd party modules, both NULL
and NGX_CONF_UNSET_PTR are accepted for now.
|
|
Changes were intended for the test repository.
|
|
Previously, if there were multiple limits configured, errors in
ngx_http_complex_value() during processing of a non-first limit
resulted in reference count leak in shared memory nodes of already
processed limits. Fix is to explicity unlock relevant nodes, much
like we do when rejecting requests.
|
|
Found by Coverity (CID 1467637).
|
|
In 7717:e3e8b8234f05, the 1st bit was incorrectly used. It shouldn't
be used for bitmask values, as it is used by NGX_CONF_BITMASK_SET.
Additionally, special value "off" added to make it possible to clear
inherited userid_flags value.
|
|
|
|
|
|
This is in preparation for the next change.
Also, moved optimization from ngx_http_proxy_rewrite_regex_handler()
to ngx_http_proxy_rewrite().
|
|
The "false" parameter of the proxy_redirect directive is deprecated.
Warning has been emitted since c2230102df6f (0.7.54).
The "off" parameter of the proxy_redirect, proxy_cookie_domain, and
proxy_cookie_path directives tells nginx not to inherit the
configuration from the previous configuration level.
Previously, after specifying the directive with the "off" parameter,
any other directives were ignored, and syntax checking was disabled.
The syntax was enforced to allow either one directive with the "off"
parameter, or several directives with other parameters.
Also, specifying "proxy_redirect default foo" no longer works like
"proxy_redirect default".
|
|
|
|
|
|
The ssl configuration is obtained at config time and saved for future use.
|
|
The new "quic_stateless_reset_token_key" directive is added. It sets the
endpoint key used to generate stateless reset tokens and enables feature.
If the endpoint receives short-header packet that can't be matched to
existing connection, a stateless reset packet is generated with
a proper token.
If a valid stateless reset token is found in the incoming packet,
the connection is closed.
Example configuration:
http {
quic_stateless_reset_token_key "foo";
...
}
|
|
|
|
After 05e42236e95b (1.19.1) responses with extra data might result in
zero size buffers being generated and "zero size buf" alerts in writer
(if f->rest happened to be 0 when processing additional stdout data).
|
|
Previously, the document generated by the xslt filter was always fully sent
to client even if a range was requested and response status was 206 with
appropriate Content-Range.
The xslt module is unable to serve a range because of suspending the header
filter chain. By the moment full response xml is buffered by the xslt filter,
range header filter is not called yet, but the range body filter has already
been called and did nothing.
The fix is to disable ranges by resetting the r->allow_ranges flag much like
the image filter that employs a similar technique.
|
|
Also, introduced ngx_stream_quic_module.
|
|
The parameter allows processing HTTP/0.9-2 over QUIC.
Also, introduced ngx_http_quic_module and moved QUIC settings there
|
|
|
|
The slice filter allows ranges for the response by setting the r->allow_ranges
flag, which enables the range filter. If the range was not requested, the
range filter adds an Accept-Ranges header to the response to signal the
support for ranges.
Previously, if an Accept-Ranges header was already present in the first slice
response, client received two copies of this header. Now, the slice filter
removes the Accept-Ranges header from the response prior to setting the
r->allow_ranges flag.
|
|
As long as the "Content-Length" header is given, we now make sure
it exactly matches the size of the response. If it doesn't,
the response is considered malformed and must not be forwarded
(https://tools.ietf.org/html/rfc7540#section-8.1.2.6). While it
is not really possible to "not forward" the response which is already
being forwarded, we generate an error instead, which is the closest
equivalent.
Previous behaviour was to pass everything to the client, but this
seems to be suboptimal and causes issues (ticket #1695). Also this
directly contradicts HTTP/2 specification requirements.
Note that the new behaviour for the gRPC proxy is more strict than that
applied in other variants of proxying. This is intentional, as HTTP/2
specification requires us to do so, while in other types of proxying
malformed responses from backends are well known and historically
tolerated.
|
|
Previous behaviour was to pass everything to the client, but this
seems to be suboptimal and causes issues (ticket #1695). Fix is to
drop extra data instead, as it naturally happens in most clients.
Additionally, we now also issue a warning if the response is too
short, and make sure the fact it is truncated is propagated to the
client. The u->error flag is introduced to make it possible to
propagate the error to the client in case of unbuffered proxying.
For responses to HEAD requests there is an exception: we do allow
both responses without body and responses with body matching the
Content-Length header.
|
|
Previous behaviour was to pass everything to the client, but this
seems to be suboptimal and causes issues (ticket #1695). Fix is to
drop extra data instead, as it naturally happens in most clients.
This change covers generic buffered and unbuffered filters as used
in the scgi and uwsgi modules. Appropriate input filter init
handlers are provided by the scgi and uwsgi modules to set corresponding
lengths.
Note that for responses to HEAD requests there is an exception:
we do allow any response length. This is because responses to HEAD
requests might be actual full responses, and it is up to nginx
to remove the response body. If caching is enabled, only full
responses matching the Content-Length header will be cached
(see b779728b180c).
|
|
|
|
Previously, additional data after final chunk was either ignored
(in the same buffer, or during unbuffered proxying) or sent to the
client (in the next buffer already if it was already read from the
socket). Now additional data are properly detected and ignored
in all cases. Additionally, a warning is now logged and keepalive
is disabled in the connection.
|
|
Previous behaviour was to pass everything to the client, but this
seems to be suboptimal and causes issues (ticket #1695). Fix is to
drop extra data instead, as it naturally happens in most clients.
|
|
If a memcached response was followed by a correct trailer, and then
the NUL character followed by some extra data - this was accepted by
the trailer checking code. This in turn resulted in ctx->rest underflow
and caused negative size buffer on the next reading from the upstream,
followed by the "negative size buf in writer" alert.
Fix is to always check for too long responses, so a correct trailer cannot
be followed by extra data.
|
|
The flush flag was not set when forwarding the request body to the uwsgi
server. When using uwsgi_pass suwsgi://..., this causes the uwsgi server
to wait indefinitely for the request body and eventually time out due to
SSL buffering.
This is essentially the same change as 4009:3183165283cc, which was made
to ngx_http_proxy_module.c.
This will fix the uwsgi bug https://github.com/unbit/uwsgi/issues/1490.
|
|
|
|
When enabled, certificate status is stored in cache and is used to validate
the certificate in future requests.
New directive ssl_ocsp_cache is added to configure the cache.
|
|
OCSP validation for client certificates is enabled by the "ssl_ocsp" directive.
OCSP responder can be optionally specified by "ssl_ocsp_responder".
When session is reused, peer chain is not available for validation.
If the verified chain contains certificates from the peer chain not available
at the server, validation will fail.
|
|
As per https://tools.ietf.org/html/rfc7540#section-6.9,
WINDOW_UPDATE received after a frame with the END_STREAM flag
should be handled and not treated as an error.
|
|
As per https://tools.ietf.org/html/rfc7540#section-8.1,
: A server can send a complete response prior to the client
: sending an entire request if the response does not depend on
: any portion of the request that has not been sent and
: received. When this is true, a server MAY request that the
: client abort transmission of a request without error by
: sending a RST_STREAM with an error code of NO_ERROR after
: sending a complete response (i.e., a frame with the
: END_STREAM flag). Clients MUST NOT discard responses as a
: result of receiving such a RST_STREAM, though clients can
: always discard responses at their discretion for other
: reasons.
Previously, RST_STREAM(NO_ERROR) received from upstream after
a frame with the END_STREAM flag was incorrectly treated as an
error. Now, a single RST_STREAM(NO_ERROR) is properly handled.
This fixes problems observed with modern grpc-c [1], as well
as with the Go gRPC module.
[1] https://github.com/grpc/grpc/pull/1661
|
|
|
|
|
|
This is required by Chrome.
|
|
This allows listening to both https and http3 in the same server.
Also, the change eliminates the ssl_quic directive.
|
|
|
|
|
|
|
|
In "co64" atom chunk start offset is a 64-bit unsigned integer. When trimming
the "mdat" atom, chunk offsets are casted to off_t values which are typically
64-bit signed integers. A specially crafted mp4 file with huge chunk offsets
may lead to off_t overflow and result in negative trim boundaries.
The consequences of the overflow are:
- Incorrect Content-Length header value in the response.
- Negative left boundary of the response file buffer holding the trimmed "mdat".
This leads to pread()/sendfile() errors followed by closing the client
connection.
On rare systems where off_t is a 32-bit integer, this scenario is also feasible
with the "stco" atom.
The fix is to add checks which make sure data chunks referenced by each track
are within the mp4 file boundaries. Additionally a few more checks are added to
ensure mp4 file consistency and log errors.
|
|
|
|
These checks were missed when chunked support was introduced. And also
added an explicit error message to ngx_http_dav_copy_move_handler()
(it was missed for some reason, in contrast to DELETE and MKCOL handlers).
|
