| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It has been deprecated since 7270:46c0c7ef4913 (1.15.0) in favour of
the "ssl" parameter of the "listen" directive, which has been available
since 2224:109849282793 (0.7.14).
|
|
The directive enables HTTP/2 in the current server. The previous way to
enable HTTP/2 via "listen ... http2" is now deprecated. The new approach
allows to share HTTP/2 and HTTP/0.9-1.1 on the same port.
For SSL connections, HTTP/2 is now selected by ALPN callback based on whether
the protocol is enabled in the virtual server chosen by SNI. This however only
works since OpenSSL 1.0.2h, where ALPN callback is invoked after SNI callback.
For older versions of OpenSSL, HTTP/2 is enabled based on the default virtual
server configuration.
For plain TCP connections, HTTP/2 is now auto-detected by HTTP/2 preface, if
HTTP/2 is enabled in the default virtual server. If preface is not matched,
HTTP/0.9-1.1 is assumed.
|
|
The parameter has been deprecated since c851a2ed5ce8.
|
|
|
|
|
|
SSL context is not present if the default server has neither certificates nor
ssl_reject_handshake enabled. Previously, this led to null pointer dereference
before it would be caught with configuration checks.
Additionally, non-default servers with distinct SSL contexts need to initialize
compatibility layer in order to complete a QUIC handshake.
|
|
Now "listen" directve has a new "quic" parameter which enables QUIC protocol
for the address. Further, to enable HTTP/3, a new directive "http3" is
introduced. The hq-interop protocol is enabled by "http3_hq" as before.
Now application protocol is chosen by ALPN.
Previously used "http3" parameter of "listen" is deprecated.
|
|
The change allows to compile QUIC with OpenSSL which lacks BoringSSL QUIC API.
This implementation does not support 0-RTT.
|
|
Now it properly detects invalid shared zone configuration with omitted size.
Previously it used to read outside of the buffer boundary.
Found with AddressSanitizer.
|
|
|
|
|
|
|
|
Listen quic parameter is no longer supported.
|
|
|
|
|
|
The variable contains a negotiated curve used for the handshake key
exchange process. Known curves are listed by their names, unknown
ones are shown in hex.
Note that for resumed sessions in TLSv1.2 and older protocols,
$ssl_curve contains the curve used during the initial handshake,
while in TLSv1.3 it contains the curve used during the session
resumption (see the SSL_get_negotiated_group manual page for
details).
The variable is only meaningful when using OpenSSL 3.0 and above.
With older versions the variable is empty.
|
|
|
|
In particular, this fixes rejecting "listen .. quic|http3" configurations
without TLSv1.3 configured.
|
|
|
|
This is a recommended behavior by RFC 7301 and is useful
for mitigation of protocol confusion attacks [1].
To avoid possible negative effects, list of supported protocols
was extended to include all possible HTTP protocol ALPN IDs
registered by IANA [2], i.e. "http/1.0" and "http/0.9".
[1] https://alpaca-attack.com/
[2] https://www.iana.org/assignments/tls-extensiontype-values/
|
|
The variable contains protocol selected by ALPN during handshake and
is empty otherwise.
|
|
NPN was replaced with ALPN, published as RFC 7301 in July 2014.
It used to negotiate SPDY (and, in transition, HTTP/2).
NPN supported appeared in OpenSSL 1.0.1. It does not work with TLSv1.3 [1].
ALPN is supported since OpenSSL 1.0.2.
The NPN support was dropped in Firefox 53 [2] and Chrome 51 [3].
[1] https://github.com/openssl/openssl/issues/3665.
[2] https://bugzilla.mozilla.org/show_bug.cgi?id=1248198
[3] https://www.chromestatus.com/feature/5767920709795840
|
|
To load old/weak server or client certificates it might be needed to adjust
the security level, as introduced in OpenSSL 1.1.0. This change ensures that
ciphers are set before loading the certificates, so security level changes
via the cipher string apply to certificate loading.
|
|
|
|
Sun C complains about "statement not reached" if a "return" is followed
by additional statements.
|
|
|
|
Previously, a version based on NGX_QUIC_DRAFT_VERSION was always set.
Now it is taken from the negotiated QUIC version that may differ.
|
|
|
|
In some cases it might be needed to reject SSL handshake based on SNI
server name provided, for example, to make sure an invalid certificate
is not returned to clients trying to contact a name-based virtual server
without SSL configured. Previously, a "ssl_ciphers aNULL;" was used for
this. This workaround, however, is not compatible with TLSv1.3, in
particular, when using BoringSSL, where it is not possible to configure
TLSv1.3 ciphers at all.
With this change, the ssl_reject_handshake directive is introduced,
which instructs nginx to reject SSL handshakes with an "unrecognized_name"
alert in a particular server block.
For example, to reject handshake with names other than example.com,
one can use the following configuration:
server {
listen 443 ssl;
ssl_reject_handshake on;
}
server {
listen 443 ssl;
server_name example.com;
ssl_certificate example.com.crt;
ssl_certificate_key example.com.key;
}
The following configuration can be used to reject all SSL handshakes
without SNI server name provided:
server {
listen 443 ssl;
ssl_reject_handshake on;
}
server {
listen 443 ssl;
server_name ~^;
ssl_certificate example.crt;
ssl_certificate_key example.key;
}
Additionally, the ssl_reject_handshake directive makes configuring
certificates for the default server block optional. If no certificates
are configured in the default server for a given listening socket,
certificates must be defined in all non-default server blocks with
the listening socket in question.
|
|
With the ssl_conf_command directive it is now possible to set
arbitrary OpenSSL configuration parameters as long as nginx is compiled
with OpenSSL 1.0.2 or later. Full list of available configuration
commands can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
In particular, this allows configuring PrioritizeChaCha option
(ticket #1445):
ssl_conf_command Options PrioritizeChaCha;
It can be also used to configure TLSv1.3 ciphers in OpenSSL,
which fails to configure them via the SSL_CTX_set_cipher_list()
interface (ticket #1529):
ssl_conf_command Ciphersuites TLS_CHACHA20_POLY1305_SHA256;
Configuration commands are applied after nginx own configuration
for SSL, so they can be used to override anything set by nginx.
Note though that configuring OpenSSL directly with ssl_conf_command
might result in a behaviour nginx does not expect, and should be
done with care.
|
|
Changes were intended for the test repository.
|
|
|
|
The parameter allows processing HTTP/0.9-2 over QUIC.
Also, introduced ngx_http_quic_module and moved QUIC settings there
|
|
|
|
When enabled, certificate status is stored in cache and is used to validate
the certificate in future requests.
New directive ssl_ocsp_cache is added to configure the cache.
|
|
OCSP validation for client certificates is enabled by the "ssl_ocsp" directive.
OCSP responder can be optionally specified by "ssl_ocsp_responder".
When session is reused, peer chain is not available for validation.
If the verified chain contains certificates from the peer chain not available
at the server, validation will fail.
|
|
This is required by Chrome.
|
|
This allows listening to both https and http3 in the same server.
Also, the change eliminates the ssl_quic directive.
|
|
|
|
|
|
|
|
If ngx_pool_cleanup_add() fails, we have to clean just created SSL context
manually, thus appropriate call added.
Additionally, ngx_pool_cleanup_add() moved closer to ngx_ssl_create() in
the ngx_http_ssl_module, to make sure there are no leaks due to intermediate
code.
|
|
A virtual server may have no SSL context if it does not have certificates
defined, so we have to use config of the ngx_http_ssl_module from the
SSL context in the certificate callback. To do so, it is now passed as
the argument of the callback.
The stream module doesn't really need any changes, but was modified as
well to match http code.
|
|
Dynamic certificates re-introduce problem with incorrect session
reuse (AKA "virtual host confusion", CVE-2014-3616), since there are
no server certificates to generate session id context from.
To prevent this, session id context is now generated from ssl_certificate
directives as specified in the configuration. This approach prevents
incorrect session reuse in most cases, while still allowing sharing
sessions across multiple machines with ssl_session_ticket_key set as
long as configurations are identical.
|
|
Passwords have to be copied to the configuration pool to be used
at runtime. Also, to prevent blocking on stdin (with "daemon off;")
an empty password list is provided.
To make things simpler, password handling was modified to allow
an empty array (with 0 elements and elts set to NULL) as an equivalent
of an array with 1 empty password.
|
|
To evaluate variables, a request is created in the certificate callback,
and then freed. To do this without side effects on the stub_status
counters and connection state, an additional function was introduced,
ngx_http_alloc_request().
Only works with OpenSSL 1.0.2+, since there is no SSL_CTX_set_cert_cb()
in older versions.
|
|
Early data AKA 0-RTT mode is enabled as long as "ssl_early_data on" is
specified in the configuration (default is off).
The $ssl_early_data variable evaluates to "1" if the SSL handshake
isn't yet completed, and can be used to set the Early-Data header as
per draft-ietf-httpbis-replay-04.
|
|
|
|
In mail and stream modules, no certificate provided is a fatal condition,
much like with the "ssl" and "starttls" directives.
In http, "listen ... ssl" can be used in a non-default server without
certificates as long as there is a certificate in the default one, so
missing certificate is only fatal for default servers.
|
|
This variable contains URL-encoded client SSL certificate. In contrast
to $ssl_client_cert, it doesn't depend on deprecated header continuation.
The NGX_ESCAPE_URI_COMPONENT variant of encoding is used, so the resulting
variable can be safely used not only in headers, but also as a request
argument.
The $ssl_client_cert variable should be considered deprecated now.
The $ssl_client_raw_cert variable will be eventually renambed back
to $ssl_client_cert.
|
