| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Also, removed practically unused flag accept_context_updated from
ngx_connection_t.
|
|
The option is only set if the socket is bound to a specific port to allow
several such sockets coexist at the same time. This is required, for example,
when nginx acts as a transparent proxy and receives two datagrams from the same
client in a short time.
The feature is only implemented for Linux.
|
|
|
|
|
|
This patch moves various OpenSSL-specific function calls into the
OpenSSL module and introduces ngx_ssl_ciphers() to make nginx more
crypto-library-agnostic.
|
|
It's properly aligned and can hold any supported sockaddr.
|
|
Using the same DH parameters on multiple servers is believed to be subject
to precomputation attacks, see http://weakdh.org/. Additionally, 1024 bits
are not enough in the modern world as well. Let users provide their own
DH parameters with the ssl_dhparam directive if they want to use EDH ciphers.
Note that SSL_CTX_set_dh_auto() as provided by OpenSSL 1.1.0 uses fixed
DH parameters from RFC 5114 and RFC 3526, and therefore subject to the same
precomputation attacks. We avoid using it as well.
This change also fixes compilation with OpenSSL 1.1.0-pre5 (aka Beta 2),
as OpenSSL developers changed their policy after releasing Beta 1 and
broke API once again by making the DH struct opaque (see ticket #860).
|
|
OpenSSL 1.0.2+ allows configuring a curve list instead of a single curve
previously supported. This allows use of different curves depending on
what client supports (as available via the elliptic_curves extension),
and also allows use of different curves in an ECDHE key exchange and
in the ECDSA certificate.
The special value "auto" was introduced (now the default for ssl_ecdh_curve),
which means "use an internal list of curves as available in the OpenSSL
library used". For versions prior to OpenSSL 1.0.2 it maps to "prime256v1"
as previously used. The default in 1.0.2b+ prefers prime256v1 as well
(and X25519 in OpenSSL 1.1.0+).
As client vs. server preference of curves is controlled by the
same option as used for ciphers (SSL_OP_CIPHER_SERVER_PREFERENCE),
the ssl_prefer_server_ciphers directive now controls both.
|
|
|
|
|
|
|
|
The SSL_CTX_add0_chain_cert() function as introduced in OpenSSL 1.0.2 now
used instead of SSL_CTX_add_extra_chain_cert().
SSL_CTX_add_extra_chain_cert() adds extra certs for all certificates
in the context, while SSL_CTX_add0_chain_cert() only to a particular
certificate. There is no difference unless multiple certificates are used,
though it is important when using multiple certificates.
Additionally, SSL_CTX_select_current_cert() is now called before using
a chain to make sure correct chain will be returned.
|
|
A pointer to a previously configured certificate now stored in a certificate.
This makes it possible to iterate though all certificates configured in
the SSL context. This is now used to configure OCSP stapling for all
certificates, and in ngx_ssl_session_id_context().
As SSL_CTX_use_certificate() frees previously loaded certificate of the same
type, and we have no way to find out if it's the case, X509_free() calls
are now posponed till ngx_ssl_cleanup_ctx().
Note that in OpenSSL 1.0.2+ this can be done without storing things in exdata
using the SSL_CTX_set_current_cert() and SSL_CTX_get0_certificate() functions.
These are not yet available in all supported versions though, so it's easier
to continue to use exdata for now.
|
|
|
|
This makes it possible to properly return OCSP staple with multiple
certificates configured.
Note that it only works properly in OpenSSL 1.0.1d+, 1.0.0k, 0.9.8y+.
In older versions SSL_get_certificate() fails to return correct certificate
when the certificate status callback is called.
|
|
|
|
|
|
|
|
|
|
|
|
The errno value is unset in case of epoll_wait() timeout.
|
|
When it's known that the kernel supports EPOLLRDHUP, there is no need in
additional recv() call to get EOF or error when the flag is absent in the
event generated by the kernel. A special runtime test is done at startup
to detect if EPOLLRDHUP is actually supported by the kernel because
epoll_ctl() silently ignores unknown flags.
With this knowledge it's now possible to drop the "ready" flag for partial
read. Previously, the "ready" flag was kept until the recv() returned EOF
or error. In particular, this change allows the lingering close heuristics
(which relies on the "ready" flag state) to actually work on Linux, and not
wait for more data in most cases.
The "available" flag is now used in the read event with the semantics similar
to the corresponding counter in kqueue.
|
|
|
|
This parameter lets binding the proxy connection to a non-local address.
Upstream will see the connection as coming from that address.
When used with $remote_addr, upstream will accept the connection from real
client address.
Example:
proxy_bind $remote_addr transparent;
|
|
It is implied for "x" and "X".
|
|
|
|
SSLeay_version() and SSLeay() are no longer available if OPENSSL_API_COMPAT
is set to 0x10100000L. Switched to using OpenSSL_version() instead.
Additionally, we now compare version strings instead of version numbers,
and this correctly works for LibreSSL as well.
|
|
To increment reference counters we now use newly introduced X509_up_ref()
function.
|
|
|
|
OpenSSL removed support for all 40 and 56 bit ciphers.
|
|
OPENSSL_config() deprecated in OpenSSL 1.1.0. Additionally,
SSL_library_init(), SSL_load_error_strings() and OpenSSL_add_all_algorithms()
are no longer available if OPENSSL_API_COMPAT is set to 0x10100000L.
The OPENSSL_init_ssl() function is now used instead with appropriate
arguments to trigger the same behaviour. The configure test changed to
use SSL_CTX_set_options().
Deinitialization now happens automatically in OPENSSL_cleanup() called
via atexit(3), so we no longer call EVP_cleanup() and ENGINE_cleanup()
directly.
|
|
|
|
|
|
LibreSSL defines OPENSSL_VERSION_NUMBER to 0x20000000L, but uses an old
API derived from OpenSSL at the time LibreSSL forked. As a result, every
version check we use to test for new API elements in newer OpenSSL versions
requires an explicit check for LibreSSL.
To reduce clutter, redefine OPENSSL_VERSION_NUMBER to 0x1000107fL if
LibreSSL is used. The same is done by FreeBSD port of LibreSSL.
|
|
|
|
|
|
Broken in d17f0584006f (1.9.13).
|
|
|
|
Fixes various aspects of --test-build-devpoll, --test-build-eventport, and
--test-build-epoll.
In particular, if --test-build-devpoll was used on Linux, then "devpoll"
event method would be preferred over "epoll". Also, wrong definitions of
event macros were chosen.
|
|
Avoid POLLREMOVE and itimerspec redefinition.
|
|
The "aio_write" directive is introduced, which enables use of aio
for writing. Currently it is meaningful only with "aio threads".
Note that aio operations can be done by both event pipe and output
chain, so proper mapping between r->aio and p->aio is provided when
calling ngx_event_pipe() and in output filter.
In collaboration with Valentin Bartenev.
|
|
If a write event happens after sendfile() but before we've got the
sendfile results in the main thread, this write event will be ignored.
And if no more events will happen, the connection will hang.
Removing the events works in the simple cases, but not always, as
in some cases events are added back by an unrelated code. E.g.,
the upstream module adds write event in the ngx_http_upstream_init()
to track client aborts.
Fix is to use wev->complete instead. It is now set to 0 before
a sendfile() task is posted, and it is set to 1 once a write event
happens. If on completion of the sendfile() task wev->complete is 1,
we know that an event happened while we were executing sendfile(), and
the socket is still ready for writing even if sendfile() did not sent
all the data or returned EAGAIN.
|
|
|
|
|
|
This fixes "called a function you should not call" and
"shutdown while in init" errors as observed with OpenSSL 1.0.2f
due to changes in how OpenSSL handles SSL_shutdown() during
SSL handshakes.
|
|
|
|
|
|
|
|
As setitimer() isn't available on Windows, time wasn't updated at all
if timer_resolution was used with the select event method. Fix is
to ignore timer_resolution in such cases.
|
|
This context is needed for shared sessions cache to work in configurations
with multiple virtual servers sharing the same port. Unfortunately, OpenSSL
does not provide an API to access the session context, thus storing it
separately.
In collaboration with Vladimir Homutov.
|
