| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Similarly to the QUIC API originated in BoringSSL, this API allows
to register custom TLS callbacks for an external QUIC implementation.
See the SSL_set_quic_tls_cbs manual page for details.
Due to a different approach used in OpenSSL 3.5, handling of CRYPTO
frames was streamlined to always write an incoming CRYPTO buffer to
the crypto context. Using SSL_provide_quic_data(), this results in
transient allocation of chain links and buffers for CRYPTO frames
received in order. Testing didn't reveal performance degradation of
QUIC handshakes, https://github.com/nginx/nginx/pull/646 provides
specific results.
|
|
Using SSL_in_init() to inspect a handshake state was replaced with
SSL_is_init_finished(). This represents a more complete fix to the
BoringSSL issue addressed in 22671b37e.
This provides awareness of the early data handshake state when using
OpenSSL 3.5 TLS callbacks in 0-RTT enabled configurations, which, in
particular, is used to avoid premature completion of the initial TLS
handshake, before required client handshake messages are received.
This is a non-functional change when using BoringSSL. It supersedes
testing non-positive SSL_do_handshake() results in all supported SSL
libraries, hence simplified.
In preparation for using OpenSSL 3.5 TLS callbacks.
|
|
Encryption level values are decoupled from ssl_encryption_level_t,
which is now limited to BoringSSL QUIC callbacks, with mappings
provided. Although the values match, this provides a technically
safe approach, in particular, to access protection level sized arrays.
In preparation for using OpenSSL 3.5 TLS callbacks.
|
|
It is now called from ngx_quic_handle_crypto_frame(), prior to proceeding
with the handshake. With this logic removed, the handshake function is
renamed to ngx_quic_handshake() to better match ngx_ssl_handshake().
|
|
All definitions now set in ngx_event_quic.h, this includes moving
NGX_QUIC_OPENSSL_COMPAT from autotests to compile time. Further,
to improve code readability, a new NGX_QUIC_QUICTLS_API macro is
used for QuicTLS that provides old BoringSSL QUIC API.
|
|
Previously, they might be logged on every add_handshake_data
callback invocation when using OpenSSL compat layer and processing
coalesced handshake messages.
Further, the ALPN error message is adjusted to signal the missing
extension. Possible reasons were previously narrowed down with
ebb6f7d65 changes in the ALPN callback that is invoked earlier in
the handshake.
|
|
Following the previous change that removed posting a close event
in OpenSSL compat layer, now ngx_quic_close_connection() is always
called on error path with either NGX_ERROR or qc->error set.
This allows to remove a special value -1 served as a missing error,
which simplifies the code. Partially reverts d3fb12d77.
Also, this improves handling of the draining connection state, which
consists of posting a close event with NGX_OK and no qc->error set,
where it was previously converted to NGX_QUIC_ERR_INTERNAL_ERROR.
Notably, this is rather a cosmetic fix, because drained connections
do not send any packets including CONNECTION_CLOSE, and qc->error
is not otherwise used.
|
|
Changed handshake callbacks to always return success. This allows to avoid
logging SSL_do_handshake() errors with empty or cryptic "internal error"
OpenSSL error messages at the inappropriate "crit" log level.
Further, connections with failed callbacks are closed now right away when
using OpenSSL compat layer. This change supersedes and reverts c37fdcdd1,
with the conditions to check callbacks invocation kept to slightly improve
code readability of control flow; they are optimized out in the resulting
assembly code.
|
|
Logging level for such errors, which should not normally happen,
is changed to NGX_LOG_ALERT, and ngx_log_error() is replaced with
ngx_ssl_error() for consistency with the rest of the code.
|
|
Various errors reported by SSL_do_handshake() are now logged at the
"info" or "crit" level, akin to handshakes on regular TCP connections.
|
|
ALPN support is present in all libraries that have QUIC support,
it is safe to compile it unconditionally.
|
|
They were blindly copied from ngx_ssl_info_callback(), where
the ngx_ssl_conn_t pointer is passed with const qualifier.
|
|
It was made unused in d15f8f2 after introducing reusable crypto contexts.
|
|
Previously, it was not possible to send acknowledgments if the
congestion window was limited or temporarily exceeded, such as
after sending a large response or MTU probe. If ACKs were not
received from the peer for some reason to update the in-flight
bytes counter below the congestion window, this might result in
a stalled connection.
The fix is to send ACKs regardless of congestion control. This
meets RFC 9002, Section 7:
: Similar to TCP, packets containing only ACK frames do not count
: toward bytes in flight and are not congestion controlled.
This is a simplified implementation to send ACK frames from the
head of the queue. This was made possible after 6f5f17358.
Reported in trac ticket #2621 and subsequently by Vladimir Homutov:
https://mailman.nginx.org/pipermail/nginx-devel/2025-April/ZKBAWRJVQXSZ2ISG3YJAF3EWMDRDHCMO.html
|
|
|
|
|
|
|
|
|
|
|
|
RFC 9002, Section 6.1.1 defines packet reordering threshold as 3. Testing
shows that such low value leads to spurious packet losses followed by
congestion window collapse. The change implements dynamic packet threshold
detection based on in-flight packet range. Packet threshold is defined
as half the number of in-flight packets, with mininum value of 3.
Also, renamed ngx_quic_lost_threshold() to ngx_quic_time_threshold()
for better compliance with RFC 9002 terms.
|
|
Previosly the threshold was hardcoded at 10000. This value is too low for
high BDP networks. For example, if all frames are STREAM frames, and MTU
is 1500, the upper limit for congestion window would be roughly 15M
(10000 * 1500). With 100ms RTT it's just a 1.2Gbps network (15M * 10 * 8).
In reality, the limit is even lower because of other frame types. Also,
the number of frames that could be used simultaneously depends on the total
amount of data buffered in all server streams, and client flow control.
The change sets frame threshold based on max concurrent streams and stream
buffer size, the product of which is the maximum number of in-flight stream
data in all server streams at any moment. The value is divided by 2000 to
account for a typical MTU 1500 and the fact that not all frames are STREAM
frames.
|
|
|
|
If connection is network-limited, MTU probes have little chance of being
sent since congestion window is almost always full. As a result, PMTUD
may not be able to reach the real MTU and the connection may operate with
a reduced MTU. The solution is to ignore the congestion window. This may
lead to a temporary increase in in-flight count beyond congestion window.
|
|
As per RFC 9000, Section 14.4:
Loss of a QUIC packet that is carried in a PMTU probe is therefore
not a reliable indication of congestion and SHOULD NOT trigger a
congestion control reaction.
|
|
As per RFC 9002, Section 7.8, congestion window should not be increased
when it's underutilized.
|
|
Previously, these functions operated on a per-level basis. This however
resulted in excessive logging of in_flight and will also led to extra
work detecting underutilized congestion window in the followup patches.
|
|
On some systems the value of ngx_current_msec is derived from monotonic
clock, for which the following is defined by POSIX:
For this clock, the value returned by clock_gettime() represents
the amount of time (in seconds and nanoseconds) since an unspecified
point in the past.
As as result, overflow protection is needed when comparing two ngx_msec_t.
The change adds such protection to the ngx_quic_detect_lost() function.
|
|
Since recovery_start field was initialized with ngx_current_msec, all
congestion events that happened within the same millisecond or cycle
iteration, were treated as in recovery mode.
Also, when handling persistent congestion, initializing recovery_start
with ngx_current_msec resulted in treating all sent packets as in recovery
mode, which violates RFC 9002, see example in Appendix B.8.
While here, also fixed recovery_start wrap protection. Previously it used
2 * max_idle_timeout time frame for all sent frames, which is not a
reliable protection since max_idle_timeout is unrelated to congestion
control. Now recovery_start <= now condition is enforced. Note that
recovery_start wrap is highly unlikely and can only occur on a
32-bit system if there are no congestion events for 24 days.
|
|
As per RFC 9002, Section B.2, max_datagram_size used in congestion window
computations should be based on path MTU.
|
|
Improved logging for simpler data extraction for plotting congestion
window graphs. In particular, added current milliseconds number from
ngx_current_msec.
While here, simplified logging text and removed irrelevant data.
|
|
Starting with OpenSSL 3.0, groups may be added externally with pluggable
KEM providers. Using SSL_get_negotiated_group(), which makes lookup in a
static table with known groups, doesn't allow to list such groups by names
leaving them in hex. Adding X25519MLKEM768 to the default group list in
OpenSSL 3.5 made this problem more visible. SSL_get0_group_name() and,
apparently, SSL_group_to_name() allow to resolve such provider-implemented
groups, which is also "generally preferred" over SSL_get_negotiated_group()
as documented in OpenSSL git commit 93d4f6133f.
This change makes external groups listing by name using SSL_group_to_name()
available since OpenSSL 3.0. To preserve "prime256v1" naming for the group
0x0017, and to avoid breaking BoringSSL and older OpenSSL versions support,
it is used supplementary for a group that appears to be unknown.
See https://github.com/openssl/openssl/issues/27137 for related discussion.
|
|
Upstream SSL sessions may be of a noticeably larger size with tickets
in TLSv1.2 and older versions, or with "stateless" tickets in TLSv1.3,
if a client certificate is saved into the session. Further, certain
stateless session resumption implemetations may store additional data.
Such one is JDK, known to also include server certificates in session
ticket data, which roughly doubles a decoded session size to slightly
beyond the previous limit. While it's believed to be an issue on the
JDK side, this change allows to save such sessions.
Another, innocent case is using RSA certificates with 8192 key size.
|
|
All such transient buffers are converted to the single storage in BSS.
In preparation to raise the limit.
|
|
|
|
This is consistent with the rest of the code and fixes build on systems
with non-standard definition of struct iovec (Solaris, Illumos).
|
|
|
|
This can happen with certificates and certificate keys specified
with variables due to partial cache update in various scenarios:
- cache expiration with only one element of pair evicted
- on-disk update with non-cacheable encrypted keys
- non-atomic on-disk update
The fix is to retry with fresh data on X509_R_KEY_VALUES_MISMATCH.
|
|
Revalidation is based on file modification time and uniq file index,
and happens after the cache object validity time is expired.
|
|
A new directive "ssl_certificate_cache max=N [valid=time] [inactive=time]"
enables caching of SSL certificate chain and secret key objects specified
by "ssl_certificate" and "ssl_certificate_key" directives with variables.
Co-authored-by: Aleksei Bavshin <a.bavshin@nginx.com>
|
|
SSL object cache, as previously introduced in 1.27.2, did not take
into account encrypted certificate keys that might be unexpectedly
fetched from the cache regardless of the matching passphrase. To
avoid this, caching of encrypted certificate keys is now disabled
based on the passphrase callback invocation.
A notable exception is encrypted certificate keys configured without
ssl_password_file. They are loaded once resulting in the passphrase
prompt on startup and reused in other contexts as applicable.
|
|
Memory based objects are always inherited, engine based objects are
never inherited to adhere the volatile nature of engines, file based
objects are inherited subject to modification time and file index.
The previous behaviour to bypass cache from the old configuration cycle
is preserved with a new directive "ssl_object_cache_inheritable off;".
|
|
While trying to close a stream in ngx_quic_close_streams() by calling its
read event handler, the next stream saved prior to that could be destroyed
recursively. This caused a segfault while trying to access the next stream.
The way the next stream could be destroyed in HTTP/3 is the following.
A request stream read event handler ngx_http_request_handler() could
end up calling ngx_http_v3_send_cancel_stream() to report a cancelled
request stream in the decoder stream. If sending stream cancellation
decoder instruction fails for any reason, and the decoder stream is the
next in order after the request stream, the issue is triggered.
The fix is to postpone calling read event handlers for all streams being
closed to avoid closing a released stream.
|
|
Previously, such packets were treated as long header packets with unknown
version 0, and a version negotiation packet was sent in response. This
could be used to set up an infinite traffic reflect loop with another nginx
instance.
Now version negotiation packets are ignored. As per RFC 9000, Section 6.1:
An endpoint MUST NOT send a Version Negotiation packet in response to
receiving a Version Negotiation packet.
|
|
Since 0-RTT and 1-RTT data exist in the same packet number space,
ngx_quic_discard_ctx incorrectly discards 1-RTT packets when
0-RTT keys are discarded.
The issue was introduced by 58b92177e7c3c50f77f807ab3846ad5c7bbf0ebe.
|
|
|
|
This follows OpenSSL and BoringSSL API, and gives a hint to compiler
that this parameter may not be modified.
|
|
|
|
This simplifies merging protocol values after ea15896 and ebd18ec.
Further, as outlined in ebd18ec18, for libraries preceeding TLSv1.2+
support, only meaningful versions TLSv1 and TLSv1.1 are set by default.
While here, fixed indentation.
|
|
|
|
This change initializes the "err" variable, used to produce a meaningful
diagnostics on error path, to a good safe value.
|
