| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
|
|
|
|
When client address is received, IPv6 address could be specified without
square brackets and without port, as well as both with the brackets and
port. The change allows IPv6 in square brackets and no port, which was
previously considered an error. This format conforms to RFC 3986.
The change also affects proxy_bind and friends.
|
|
When re-creating a non-reusable zone, make the pointer to the old zone
available during the new zone initialization.
|
|
|
|
|
|
|
|
Previously chain links could sometimes be dropped instead of being reused,
which could result in increased memory consumption during long requests.
A similar chain link issue in ngx_http_gzip_filter_module was fixed in
da46bfc484ef (1.11.10).
Based on a patch by Sangmin Lee.
|
|
|
|
Previously, it could result when left-shifting signed integer due to implicit
integer promotion, such that the most significant bit appeared on the sign bit.
In practice, though, this results in the same left value as with an explicit
cast, at least on known compilers, such as GCC and Clang. The reason is that
in_addr_t, which is equivalent to uint32_t and same as "unsigned int" in ILP32
and LP64 data type models, has the same type width as the intermediate after
integer promotion, so there's no side effects such as sign-extension. This
explains why adding an explicit cast does not change object files in practice.
Found with UndefinedBehaviorSanitizer (shift).
Based on a patch by Piotr Sikora.
|
|
|
|
|
|
This improves nginx startup times significantly when using very large number
of locations due to computational complexity of the sorting algorithm being
used: insertion sort is O(n*n) on average, while merge sort is O(n*log(n)).
In particular, in a test configuration with 20k locations total startup
time is reduced from 8 seconds to 0.9 seconds.
Prodded by Yusuke Nojima,
https://mailman.nginx.org/pipermail/nginx-devel/2023-September/NUL3Y2FPPFSHMPTFTL65KXSXNTX3NQMK.html
|
|
In ngx_regex_cleanup() allocator wasn't configured when calling
pcre2_compile_context_free() and pcre2_match_data_free(), resulting
in no ngx_free() call and leaked memory. Fix is ensure that allocator
is configured for global allocations, so that ngx_free() is actually
called to free memory.
Additionally, ngx_regex_compile_context was cleared in
ngx_regex_module_init(). It should be either not cleared, so it will
be freed by ngx_regex_cleanup(), or properly freed. Fix is to
not clear it, so ngx_regex_cleanup() will be able to free it.
Reported by ZhenZhong Wu,
https://mailman.nginx.org/pipermail/nginx-devel/2023-September/3Z5FIKUDRN2WBSL3JWTZJ7SXDA6YIWPB.html
|
|
Enabling QUIC changes ngx_connection_t layout, which is why it should be
added to the signature.
|
|
|
|
MTU selection starts by doubling the initial MTU until the first failure.
Then binary search is used to find the path MTU.
|
|
Similarly to 6822:c045b4926b2c, environment variables introduced with
the "env" directive (and "NGINX_BPF_MAPS" added by QUIC) are now allocated
via ngx_alloc(), and explicitly freed by a cleanup handler if no longer used.
In collaboration with Sergey Kandaurov.
|
|
|
|
|
|
|
|
Previously, ngx_udp_rbtree_insert_value() was used for plain UDP and
ngx_quic_rbtree_insert_value() was used for QUIC. Because of this it was
impossible to initialize connection tree in ngx_create_listening() since
this function is not aware what kind of listening it creates.
Now ngx_udp_rbtree_insert_value() is used for both QUIC and UDP. To make
is possible, a generic key field is added to ngx_udp_connection_t. It keeps
client address for UDP and connection ID for QUIC.
|
|
As per RFC 9000, Section 14:
UDP datagrams MUST NOT be fragmented at the IP layer.
|
|
The rcf->studies list is unconditionally accessed by ngx_regex_cleanup(),
and this used to cause NULL pointer dereference if allocation
failed. Fix is to set cleanup handler only when allocation succeeds.
|
|
|
|
|
|
This ensures that errors which happen during logging to syslog are logged
with proper context, such as "while logging to syslog" and the server name.
Prodded by Safar Safarly.
|
|
During initial startup the ngx_cycle->hostname is not available, and
previously this resulted in incorrect logging. Instead, hostname from the
configuration being parsed is now preserved in the syslog peer structure
and then used during logging.
Similarly, ngx_cycle->log might not match the configuration where the
syslog peer is defined if the configuration is not yet fully applied,
and previously this resulted in unexpected logging of syslog errors
and debug information. Instead, cf->cycle->new_log is now referenced
in the syslog peer structure and used for logging, similarly to how it
is done in other modules.
|
|
An UTF-8 octet sequence cannot start with a 11111xxx byte (above 0xf8),
see https://datatracker.ietf.org/doc/html/rfc3629#section-3. Previously,
such bytes were accepted by ngx_utf8_decode() and misinterpreted as 11110xxx
bytes (as in a 4-byte sequence). While unlikely, this can potentially cause
issues.
Fix is to explicitly reject such bytes in ngx_utf8_decode().
|
|
This is expected to help with clients using pipelining with some constant
depth, such as apt[1][2].
When downloading many resources, apt uses pipelining with some constant
depth, a number of requests in flight. This essentially means that after
receiving a response it sends an additional request to the server, and
this can result in requests arriving to the server at any time. Further,
additional requests are sent one-by-one, and can be easily seen as such
(neither as pipelined, nor followed by pipelined requests).
The only safe approach to close such connections (for example, when
keepalive_requests is reached) is with lingering. To do so, now nginx
monitors if pipelining was used on the connection, and if it was, closes
the connection with lingering.
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=973861#10
[2] https://mailman.nginx.org/pipermail/nginx-devel/2023-January/ZA2SP5SJU55LHEBCJMFDB2AZVELRLTHI.html
|
|
|
|
|
|
|
|
|
|
|
|
Casts are believed to be not needed, since memcmp() has "const void *"
arguments since introduction of the "void" type in C89. And on pre-C89
platforms nginx is unlikely to compile without warnings anyway, as there
are no casts in memcpy() and memmove() calls.
These casts were added in 1648:89a47f19b9ec without any details on why they
were added, and Igor does not remember details either. The most plausible
explanation is that they were copied from ngx_strcmp() and were not really
needed even at that time.
Prodded by Alejandro Colomar.
|
|
|
|
|
|
The check is not expected to fail unless there is a bug in the calling
code. But given the check is here, it should log an alert if it fails
instead of silently closing the connection.
|
|
Maximum size for reading the PROXY protocol header is increased to 4096 to
accommodate a bigger number of TLVs, which are supported since cca4c8a715de.
Maximum size for writing the PROXY protocol header is not changed since only
version 1 is currently supported.
|
|
|
|
The cast is added to make ngx_proxy_protocol_parse_uint16() similar to
ngx_proxy_protocol_parse_uint32().
|
|
The variables have prefix $proxy_protocol_tlv_ and are accessible by name
and by type. Examples are: $proxy_protocol_tlv_0x01, $proxy_protocol_tlv_alpn.
|
|
Previously, all received user input was logged. If a multi-line text was
received from client and logged, it could reduce log readability and also make
it harder to parse nginx log by scripts. The change brings to PROXY protocol
the same behavior that exists for HTTP request line in
ngx_http_log_error_handler().
|
|
|
|
|
|
This change partially reverts 2a77754cd9fe to properly free rn->query.
Found by Coverity (CID 1507244).
|
|
When set to "off", only IPv6 addresses will be resolved, and no
A queries are ever sent (ticket #2196).
|
