| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The "ngx_event_quic.h" header file now contains only public definitions,
used by modules. All internal definitions are moved into
the "ngx_event_quic_connection.h" header file.
|
|
The function correctly cleans up resources in case of failure to create
initial server id: it removes previously created udp node for odcid from
listening rbtree.
|
|
It turns out no browsers implement HTTP/2 GOAWAY handling properly, and
large enough number of resources on a page results in failures to load
some resources. In particular, Chrome seems to experience errors if
loading of all resources requires more than 1 connection (while it
is usually able to retry requests at least once, even with 2 connections
there are occasional failures for some reason), Safari if loading requires
more than 3 connections, and Firefox if loading requires more than 10
connections (can be configured with network.http.request.max-attempts,
defaults to 10).
It does not seem to be possible to resolve this on nginx side, even strict
limiting of maximum concurrency does not help, and loading issues seems to
be triggered by merely queueing of a request for a particular connection.
The only available mitigation seems to use higher keepalive_requests value.
The new default is 1000 and matches previously used default for
http2_max_requests. It is expected to be enough for 99.98% of the pages
(https://httparchive.org/reports/state-of-the-web?start=latest#reqTotal)
even in Chrome.
|
|
|
|
Similar to lingering_time, it limits total connection lifetime before
keepalive is switched off. The default is 1 hour, which is close to
the total maximum connection lifetime possible with default
keepalive_requests and keepalive_timeout.
|
|
Created frame was not added to the output queue.
|
|
Firefox uses several idle streams for PRIORITY frames[1], and
"http2_max_concurrent_streams 1;" results in "client sent too many
PRIORITY frames" errors when a connection is established by Firefox.
Fix is to relax the PRIORITY frames limit to use at least 100 as
the initial value (which is the recommended by the HTTP/2 protocol
minimum limit on the number of concurrent streams, so it is not
unreasonable for clients to assume that similar number of idle streams
can be used for prioritization).
[1] https://hg.mozilla.org/mozilla-central/file/32a9e6e145d6e3071c3993a20bb603a2f388722b/netwerk/protocol/http/Http2Stream.cpp#l1270
|
|
In FreeBSD 13, eventfd(2) was added, and this breaks build
with --test-build-epoll and without --with-file-aio. Fix is
to move eventfd(2) detection to auto/os/linux, as it is used
only on Linux as a notification mechanism for epoll().
|
|
|
|
The AEAD_LIMIT_REACHED was addeded in draft-31.
The NO_VIABLE_PATH was added in draft-33.
|
|
|
|
|
|
|
|
This fixes leak on successful path when built with OpenSSL.
|
|
In current versions (all versions based on zlib 1.2.11, at least
since 2018) it no longer uses 64K hash and does not force window
bits to 13 if it is less than 13. That is, it needs just 16 bytes
more memory than normal zlib, so these bytes are simply added to
the normal size calculation.
|
|
|
|
|
|
|
|
|
|
|
|
In limit_req, auth_delay, and upstream code to check for broken
connections, tests for possible connection close by the client
did not work if the connection was already closed when relevant
event handler was set. This happened because there were no additional
events in case of edge-triggered event methods, and read events
were disabled in case of level-triggered ones.
Fix is to explicitly post a read event if the c->read->ready flag
is set.
|
|
For connection close to be reported with eventport on Solaris,
ngx_handle_read_event() needs to be called.
|
|
For new data to be reported with eventport on Solaris,
ngx_handle_read_event() needs to be called after reading response
headers. To do so, ngx_http_upstream_process_non_buffered_upstream()
now called unconditionally if there are no prepread data. This
won't cause any read() syscalls as long as upstream connection
is not ready for reading (c->read->ready is not set), but will result
in proper handling of all events.
|
|
If we need to be notified about further events, ngx_handle_read_event()
needs to be called after a read event is processed. Without this,
an event can be removed from the kernel and won't be reported again,
notably when using oneshot event methods, such as eventport on Solaris.
While here, error handling is also added, similar to one present in
ngx_resolver_tcp_read(). This is not expected to make a difference
and mostly added for consistency.
|
|
If an attempt is made to delete an event which was already reported,
port_dissociate() returns an error. Fix is avoid doing anything if
ev->active is not set.
Possible alternative approach would be to avoid calling ngx_del_event()
at all if ev->active is not set. This approach, however, will require
something else to re-add the other event of the connection, since both
read and write events are dissociated if an event is reported on a file
descriptor. Currently ngx_eventport_del_event() re-associates write
event if called to delete read event, and vice versa.
|
|
If, at the start of an event loop iteration, there are any timers
in the past (including timers expiring now), the ngx_process_events()
function is called with zero timeout, and returns immediately even
if there are no events. But the following code only calls
ngx_event_expire_timers() if time actually changed, so this results
in nginx spinning in the event loop till current time changes.
While such timers are not expected to appear under normal conditions,
as all such timers should be removed on previous event loop iterations,
they still can appear due to bugs, zero timeouts set in the configuration
(if this is not explicitly handled by the code), or due to external
time changes on systems without clock_gettime(CLOCK_MONOTONIC).
Fix is to call ngx_event_expire_timers() unconditionally. Calling
it on each event loop iteration is not expected to be significant from
performance point of view, especially compared to a syscall in
ngx_process_events().
|
|
Without explicit handling, a zero timer was actually added, leading to
multiple unneeded syscalls. Further, sending GOAWAY frame early might
be beneficial for clients.
Reported by Sergey Kandaurov.
|
|
Unlike in 75e908236701, which added the logic to ngx_http_finalize_request(),
this change moves it to a more generic routine ngx_http_finalize_connection()
to cover cases when a request is finalized with NGX_DONE.
In particular, this fixes unwanted connection transition into the keepalive
state after receiving EOF while discarding request body. With edge-triggered
event methods that means the connection will last for extra seconds as set in
the keepalive_timeout directive.
|
|
The response size check introduced in 39501ce97e29 did not take into
account possible padding on DATA frames, resulting in incorrect
"upstream sent response body larger than indicated content length" errors
if upstream server used padding in responses with known length.
Fix is to check the actual size of response buffers produced by the code,
similarly to how it is done in other protocols, instead of checking
the size of DATA frames.
Reported at:
http://mailman.nginx.org/pipermail/nginx-devel/2021-March/013907.html
|
|
|
|
The connection migration-related code from quic.c with dependencies is moved
into separate file.
|
|
|
|
Currently listener contains rbtree with multiple nodes for single QUIC
connection: each corresponding to specific server id. Each udp node points
to same ngx_connection_t, which points to QUIC connection via c->udp field.
Thus when an event handler is called, it only gets ngx_connection_t with
c->udp pointing to QUIC connection. This makes it hard to obtain actual
node which was used to dispatch packet (it requires to repeat DCID lookup).
Additionally, ngx_quic_connection_t->udp field is only needed to keep a
pointer in c->udp. The node is not added into the tree and does not carry
useful information.
|
|
Sometimes it is required to process datagram properties at higher level (i.e.
QUIC is interested in source address which may change and IP options). The
patch adds ngx_udp_dgram_t structure used to pass packet-related information
in c->udp.
|
|
The start field is used to check if the QUIC packet is first in the datagram.
This fixes stateless reset detection.
|
|
When a QUIC datagram arrives, its DCID is never empty. Previously, the case
of empty DCID was handled. Now this code is simplified.
|
|
When a connection is created, enough memory is allocated to accomodate
any future address change.
|
|
Previously, when a new datagram arrived, data were copied from the UDP layer
to the QUIC layer via c->recv() interface. Now UDP buffer is accessed
directly.
|
|
OpenSSL 3.0 started to require HKDF-Extract output PRK length pointer
used to represent the amount of data written to contain the length of
the key buffer before the call. EVP_PKEY_derive() documents this.
See HKDF_Extract() internal implementation update in this change:
https://github.com/openssl/openssl/commit/5a285ad
|
|
|
|
Previously, the value was always "1".
|
|
The maximum number of HTTP/3 unidirectional client streams we can handle is 3:
control, decode and encode. These streams are never closed.
|
|
This timeout limits the time when no client request streams exist.
|
|
The function ngx_quic_shutdown_connection() waits until all non-cancelable
streams are closed, and then closes the connection. In HTTP/3 cancelable
streams are all unidirectional streams except push streams.
The function is called from HTTP/3 when client reaches keepalive_requests.
|
|
The last request in connection is determined according to the keepalive_requests
directive. Requests beyond keepalive_requests are rejected.
|
|
|
|
|
|
In case of long header packets, dcid length was not read correctly.
While there, macros to parse uint64 was fixed as well as format specifiers
to print it in debug mode.
Thanks to Gao Yan <gaoyan09@baidu.com>.
|
|
Fixes interop with quic-go that doesn't send MAX_PUSH_ID.
|
|
It was an agreement to use "hq-interop"[1] for interoperability testing.
[1] https://github.com/quicwg/base-drafts/wiki/ALPN-IDs-used-with-QUIC
|
