| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
In OpenSSL, session resumption always happens in the default SSL context,
prior to invoking the SNI callback. Further, unlike in TLSv1.2 and older
protocols, SSL_get_servername() returns values received in the resumption
handshake, which may be different from the value in the initial handshake.
Notably, this makes the restriction added in b720f650b insufficient for
sessions resumed with different SNI server name.
Considering the example from b720f650b, previously, a client was able to
request example.org by presenting a certificate for example.org, then to
resume and request example.com.
The fix is to reject handshakes resumed with a different server name, if
verification of client certificates is enabled in a corresponding server
configuration.
|
|
The directive sets a timeout during which a keepalive connection will
not be closed by nginx for connection reuse or graceful shutdown.
The change allows clients that send multiple requests over the same
connection without delay or with a small delay between them, to avoid
receiving a TCP RST in response to one of them. This excludes network
issues and non-graceful shutdown. As a side-effect, it also addresses
the TCP reset problem described in RFC 9112, Section 9.6, when the last
sent HTTP response could be damaged by a followup TCP RST. It is important
for non-idempotent requests, which cannot be retried by client.
It is not recommended to set keepalive_min_timeout to large values as
this can introduce an additional delay during graceful shutdown and may
restrict nginx from effective connection reuse.
|
|
The recently added GitHub files now reside in the docs directory.
|
|
The build location of the resulting libatomic_ops.a was changed in v7.4.0
after converting libatomic_ops to use libtool. The fix is to use library
from the install path, this allows building with both old and new versions.
Initially reported here:
https://mailman.nginx.org/pipermail/nginx/2018-April/056054.html
|
|
This is consistent with the rest of the code and fixes build on systems
with non-standard definition of struct iovec (Solaris, Illumos).
|
|
|
|
This can happen with certificates and certificate keys specified
with variables due to partial cache update in various scenarios:
- cache expiration with only one element of pair evicted
- on-disk update with non-cacheable encrypted keys
- non-atomic on-disk update
The fix is to retry with fresh data on X509_R_KEY_VALUES_MISMATCH.
|
|
Caching is enabled with proxy_ssl_certificate_cache and friends.
Co-authored-by: Aleksei Bavshin <a.bavshin@nginx.com>
|
|
Revalidation is based on file modification time and uniq file index,
and happens after the cache object validity time is expired.
|
|
A new directive "ssl_certificate_cache max=N [valid=time] [inactive=time]"
enables caching of SSL certificate chain and secret key objects specified
by "ssl_certificate" and "ssl_certificate_key" directives with variables.
Co-authored-by: Aleksei Bavshin <a.bavshin@nginx.com>
|
|
SSL object cache, as previously introduced in 1.27.2, did not take
into account encrypted certificate keys that might be unexpectedly
fetched from the cache regardless of the matching passphrase. To
avoid this, caching of encrypted certificate keys is now disabled
based on the passphrase callback invocation.
A notable exception is encrypted certificate keys configured without
ssl_password_file. They are loaded once resulting in the passphrase
prompt on startup and reused in other contexts as applicable.
|
|
Memory based objects are always inherited, engine based objects are
never inherited to adhere the volatile nature of engines, file based
objects are inherited subject to modification time and file index.
The previous behaviour to bypass cache from the old configuration cycle
is preserved with a new directive "ssl_object_cache_inheritable off;".
|
|
|
|
It now uses 5/4 times more memory for the pending buffer.
Further, a single allocation is now used, which takes additional 56 bytes
for deflate_allocs in 64-bit mode aligned to 16, to store sub-allocation
pointers, and the total allocation size now padded up to 128 bytes, which
takes theoretically 200 additional bytes in total. This fits though into
"4 * (64 + sizeof(void*))" additional space for ZALLOC used in zlib-ng
2.1.x versions. The comment was updated to reflect this.
|
|
|
|
While trying to close a stream in ngx_quic_close_streams() by calling its
read event handler, the next stream saved prior to that could be destroyed
recursively. This caused a segfault while trying to access the next stream.
The way the next stream could be destroyed in HTTP/3 is the following.
A request stream read event handler ngx_http_request_handler() could
end up calling ngx_http_v3_send_cancel_stream() to report a cancelled
request stream in the decoder stream. If sending stream cancellation
decoder instruction fails for any reason, and the decoder stream is the
next in order after the request stream, the issue is triggered.
The fix is to postpone calling read event handlers for all streams being
closed to avoid closing a released stream.
|
|
Previously, such packets were treated as long header packets with unknown
version 0, and a version negotiation packet was sent in response. This
could be used to set up an infinite traffic reflect loop with another nginx
instance.
Now version negotiation packets are ignored. As per RFC 9000, Section 6.1:
An endpoint MUST NOT send a Version Negotiation packet in response to
receiving a Version Negotiation packet.
|
|
The original security policy language did not capture the scope
as intended for experimental features and availability.
|
|
Since 0-RTT and 1-RTT data exist in the same packet number space,
ngx_quic_discard_ctx incorrectly discards 1-RTT packets when
0-RTT keys are discarded.
The issue was introduced by 58b92177e7c3c50f77f807ab3846ad5c7bbf0ebe.
|
|
|
|
|
|
In particular, an untagged CAPABILITY response as described in the
interim RFC 3501 internet drafts was seen in various IMAP servers.
Previously resulted in a broken connection, now an untagged response
is proxied to client.
|
|
When client address is received, IPv6 address could be specified without
square brackets and without port, as well as both with the brackets and
port. The change allows IPv6 in square brackets and no port, which was
previously considered an error. This format conforms to RFC 3986.
The change also affects proxy_bind and friends.
|
|
|
|
This follows OpenSSL and BoringSSL API, and gives a hint to compiler
that this parameter may not be modified.
|
|
Renaming a temporary file to an empty path ("") returns NGX_ENOPATH
with a subsequent ngx_create_full_path() to create the full path.
This function skips initial bytes as part of path separator lookup,
which causes out of bounds access on short strings.
The fix is to avoid renaming a temporary file to an obviously invalid
path, as well as explicitly forbid such syntax for literal values.
Although Coverity reports about potential type underflow, it is not
actually possible because the terminating '\0' is always included.
Notably, the run-time check is sufficient enough for Win32 as well.
Other short invalid values result either in NGX_ENOENT or NGX_EEXIST
and "MoveFile() .. failed" critical log messages, which involves a
separate error handling.
Prodded by Coverity (CID 1605485).
|
|
|
|
This simplifies merging protocol values after ea15896 and ebd18ec.
Further, as outlined in ebd18ec18, for libraries preceeding TLSv1.2+
support, only meaningful versions TLSv1 and TLSv1.1 are set by default.
While here, fixed indentation.
|
|
When cropping stsc atom, it's assumed that chunk index is never 0.
Based on this assumption, start_chunk and end_chunk are calculated
by subtracting 1 from it. If chunk index is zero, start_chunk or
end_chunk may underflow, which will later trigger
"start/end time is out mp4 stco chunks" error. The change adds an
explicit check for zero chunk index to avoid underflow and report
a proper error.
Zero chunk index is explicitly banned in ISO/IEC 14496-12, 8.7.4
Sample To Chunk Box. It's also implicitly banned in QuickTime File
Format specification. Description of chunk offset table references
"Chunk 1" as the first table element.
|
|
Currently an error is triggered if any of the chunk runs in stsc are
unordered. This however does not include the final chunk run, which
ends with trak->chunks + 1. The previous chunk index can be larger
leading to a 32-bit overflow. This could allow to skip the validity
check "if (start_sample > n)". This could later lead to a large
trak->start_chunk/trak->end_chunk, which would be caught later in
ngx_http_mp4_update_stco_atom() or ngx_http_mp4_update_co64_atom().
While there are no implications of the validity check being avoided,
the change still adds a check to ensure the final chunk run is ordered,
to produce a meaningful error and avoid a potential integer overflow.
|
|
A specially crafted mp4 file with an empty run of chunks in the stsc atom
and a large value for samples per chunk for that run, combined with a
specially crafted request, allowed to store that large value in prev_samples
and later in trak->end_chunk_samples while in ngx_http_mp4_crop_stsc_data().
Later in ngx_http_mp4_update_stsz_atom() this could result in buffer
overread while calculating trak->end_chunk_samples_size.
Now the value of samples per chunk specified for an empty run is ignored.
|
|
|
|
This change initializes the "err" variable, used to produce a meaningful
diagnostics on error path, to a good safe value.
|
|
|
|
Absolute paths in links end up being rooted at github.com.
The contributing guidelines link is broken unless we use the full URL.
Also, remove superfluous "monospace formatting" for the link.
|
|
|
|
|
|
|
|
MSVC generates a compilation error in case #if/#endif is used in a macro
parameter.
|
|
Previously, all upstream DNS entries would be immediately re-resolved
on config reload. With a large number of upstreams, this creates
a spike of DNS resolution requests. These spikes can overwhelm the
DNS server or cause drops on the network.
This patch retains the TTL of previous resolutions across reloads
by copying each upstream's name's expiry time across configuration
cycles. As a result, no additional resolutions are needed.
|
|
The "resolver" and "resolver_timeout" directives can now be specified
directly in the "upstream" block.
|
|
After configuration is reloaded, it may take some time for the
re-resolvable upstream servers to resolve and become available
as peers. During this time, client requests might get dropped.
Such servers are now pre-resolved using the "cache" of already
resolved peers from the old shared memory zone.
|
|
When re-creating a non-reusable zone, make the pointer to the old zone
available during the new zone initialization.
|
|
|
|
Specifying the upstream server by a hostname together with the
"resolve" parameter will make the hostname to be periodically
resolved, and upstream servers added/removed as necessary.
This requires a "resolver" at the "http" configuration block.
The "resolver_timeout" parameter also affects when the failed
DNS requests will be attempted again. Responses with NXDOMAIN
will be attempted again in 10 seconds.
Upstream has a configuration generation number that is incremented each
time servers are added/removed to the primary/backup list. This number
is remembered by the peer.init method, and if peer.get detects a change
in configuration, it returns NGX_BUSY.
Each server has a reference counter. It is incremented by peer.get and
decremented by peer.free. When a server is removed, it is removed from
the list of servers and is marked as "zombie". The memory allocated by
a zombie peer is freed only when its reference count becomes zero.
Co-authored-by: Roman Arutyunyan <arut@nginx.com>
Co-authored-by: Sergey Kandaurov <pluknet@nginx.com>
Co-authored-by: Vladimir Homutov <vl@nginx.com>
|
|
TLSv1 and TLSv1.1 are formally deprecated and forbidden to negotiate due
to insufficient security reasons outlined in RFC 8996.
TLSv1 and TLSv1.1 are disabled in BoringSSL e95b0cad9 and LibreSSL 3.8.1
in the way they cannot be enabled in nginx configuration. In OpenSSL 3.0,
they are only permitted at security level 0 (disabled by default).
The support is dropped in Chrome 84, Firefox 78, and deprecated in Safari.
This change disables TLSv1 and TLSv1.1 by default for OpenSSL 1.0.1 and
newer, where TLSv1.2 support is available. For older library versions,
which do not have alternatives, these protocol versions remain enabled.
|
|
|
|
|
