| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
Prodded by Clang Static Analyzer.
|
|
This allows to build nginx on macOS with -Wdeprecated-declarations.
|
|
If a filter wants to buffer the request body during reading (for
example, to check an external scanner), it can now do so. To make
it possible, the code now checks rb->last_saved (introduced in the
previous change) along with rb->rest == 0.
Since in HTTP/2 this requires flow control to avoid overflowing the
request body buffer, so filters which need buffering have to set
the rb->filter_need_buffering flag on the first filter call. (Note
that each filter is expected to call the next filter, so all filters
will be able set the flag if needed.)
|
|
It indicates that the last buffer was received by the save filter,
and can be used to check this at higher levels. To be used in the
following changes.
|
|
If due to an error ngx_http_request_body_save_filter() is called
more than once with rb->rest == 0, this used to result in a segmentation
fault. Added an alert to catch such errors, just in case.
|
|
|
|
Previously, fully preread unbuffered requests larger than client body
buffer size were saved to disk, despite the fact that "unbuffered" is
expected to imply no disk buffering.
|
|
The save body filter saves the request body to disk once the buffer is full.
Yet in HTTP/2 this might happen even if there is no need to save anything
to disk, notably when content length is known and the END_STREAM flag is
sent in a separate empty DATA frame. Workaround is to provide additional
byte in the buffer, so saving the request body won't be triggered.
This fixes unexpected request body disk buffering in HTTP/2 observed after
the previous change when content length is known and the END_STREAM flag
is sent in a separate empty DATA frame.
|
|
In particular, now the code always uses a buffer limited by
client_body_buffer_size. At the cost of an additional copy it
ensures that small DATA frames are not directly mapped to small
write() syscalls, but rather buffered in memory before writing.
Further, requests without Content-Length are no longer forced
to use temporary files.
|
|
|
|
With SSL it is possible that an established connection is ready for
reading after the handshake. Further, events might be already disabled
in case of level-triggered event methods. If this happens and
ngx_http_upstream_send_request() blocks waiting for some data from
the upstream, such as flow control in case of gRPC, the connection
will time out due to no read events on the upstream connection.
Fix is to explicitly check the c->read->ready flag if sending request
blocks and post a read event if it is set.
Note that while it is possible to modify ngx_ssl_handshake() to keep
read events active, this won't completely resolve the issue, since
there can be data already received during the SSL handshake
(see 573bd30e46b4).
|
|
This adds new Auth-SSL-Protocol and Auth-SSL-Cipher headers to
the mail proxy auth protocol when SSL is enabled.
This can be useful for detecting users using older clients that
negotiate old ciphers when you want to upgrade to newer
TLS versions of remove suppport for old and insecure ciphers.
You can use your auth backend to notify these users before the
upgrade that they either need to upgrade their client software
or contact your support team to work out an upgrade path.
|
|
To load old/weak server or client certificates it might be needed to adjust
the security level, as introduced in OpenSSL 1.1.0. This change ensures that
ciphers are set before loading the certificates, so security level changes
via the cipher string apply to certificate loading.
|
|
Prodded by Duncan Lock.
|
|
Indentation of the CSS code removed to match style of the HTML code.
|
|
It has no effect since OpenSSL 0.9.7h and 0.9.8a.
|
|
Export ciphers are forbidden to negotiate in TLS 1.1 and later protocol modes.
They are disabled since OpenSSL 1.0.2g by default unless explicitly configured
with "enable-weak-ssl-ciphers", and completely removed in OpenSSL 1.1.0.
|
|
A new behaviour was introduced in OpenSSL 1.1.1e, when a peer does not send
close_notify before closing the connection. Previously, it was to return
SSL_ERROR_SYSCALL with errno 0, known since at least OpenSSL 0.9.7, and is
handled gracefully in nginx. Now it returns SSL_ERROR_SSL with a distinct
reason SSL_R_UNEXPECTED_EOF_WHILE_READING ("unexpected eof while reading").
This leads to critical errors seen in nginx within various routines such as
SSL_do_handshake(), SSL_read(), SSL_shutdown(). The behaviour was restored
in OpenSSL 1.1.1f, but presents in OpenSSL 3.0 by default.
Use of the SSL_OP_IGNORE_UNEXPECTED_EOF option added in OpenSSL 3.0 allows
to set a compatible behaviour to return SSL_ERROR_ZERO_RETURN:
https://git.openssl.org/?p=openssl.git;a=commitdiff;h=09b90e0
See for additional details: https://github.com/openssl/openssl/issues/11381
|
|
The OPENSSL_SUPPRESS_DEPRECATED macro is used to suppress deprecation warnings.
This covers Session Tickets keys, SSL Engine, DH low level API for DHE ciphers.
Unlike OPENSSL_API_COMPAT, it works well with OpenSSL built with no-deprecated.
In particular, it doesn't unhide various macros in OpenSSL includes, which are
meant to be hidden under OPENSSL_NO_DEPRECATED.
|
|
ERR_peek_error_line_data() was deprecated in favour of ERR_peek_error_all().
Here we use the ERR_peek_error_data() helper to pass only used arguments.
|
|
Using PEM_read_bio_DHparams() and SSL_CTX_set_tmp_dh() is deprecated
as part of deprecating the low level DH functions in favor of EVP_PKEY:
https://git.openssl.org/?p=openssl.git;a=commitdiff;h=163f6dc
|
|
Switch to SSL_get1_peer_certificate() when building with OpenSSL 3.0
and OPENSSL_NO_DEPRECATED defined.
|
|
The only consumer is a callback function for SSL_CTX_set_tmp_rsa_callback()
deprecated in OpenSSL 1.1.0. Now the function is conditionally compiled too.
|
|
The latest HTTP/1.1 draft describes Transfer-Encoding in HTTP/1.0 as having
potentially faulty message framing as that could have been forwarded without
handling of the chunked encoding, and forbids processing subsequest requests
over that connection: https://github.com/httpwg/http-core/issues/879.
While handling of such requests is permitted, the most secure approach seems
to reject them.
|
|
For example, it can fail due to weak DH parameters.
|
|
The c->read->ready and c->write->ready flags might be reset during
the handshake, and not set again if the handshake was finished on
the other event. At the same time, some data might be read from
the socket during the handshake, so missing c->read->ready flag might
result in a connection hang, for example, when waiting for an SMTP
greeting (which was already received during the handshake).
Found by Sergey Kandaurov.
|
|
|
|
|
|
|
|
The ngx_wsasend_chain() and ngx_wsarecv_chain() functions were
modified to use only preallocated memory, and the number of
preallocated wsabufs was increased to 64.
|
|
In d1bde5c3c5d2, the number of preallocated iovec's for ngx_readv_chain()
was increased. Still, in some setups, the function might allocate memory
for iovec's from a connection pool, which is only freed when closing the
connection.
The ngx_readv_chain() function was modified to use only preallocated
memory, similarly to the ngx_writev_chain() change in 8e903522c17a.
|
|
Control characters (0x00-0x1f, 0x7f) and space are not expected to appear
in the Host header. Requests with such characters in the Host header are
now unconditionally rejected.
|
|
In 71edd9192f24 logging of invalid headers which were rejected with the
NGX_HTTP_PARSE_INVALID_HEADER error was restricted to just the "client
sent invalid header line" message, without any attempts to log the header
itself.
This patch returns logging of the header up to the invalid character and
the character itself. The r->header_end pointer is now properly set
in all cases to make logging possible.
The same logging is also introduced when parsing headers from upstream
servers.
|
|
Control characters (0x00-0x1f, 0x7f), space, and colon were never allowed in
header names. The only somewhat valid use is header continuation which nginx
never supported and which is explicitly obsolete by RFC 7230.
Previously, such headers were considered invalid and were ignored by default
(as per ignore_invalid_headers directive). With this change, such headers
are unconditionally rejected.
It is expected to make nginx more resilient to various attacks, in particular,
with ignore_invalid_headers switched off (which is inherently unsecure, though
nevertheless sometimes used in the wild).
|
|
Control characters (0x00-0x1f, 0x7f) were never allowed in URIs, and must
be percent-encoded by clients. Further, these are not believed to appear
in practice. On the other hand, passing such characters might make various
attacks possible or easier, despite the fact that currently allowed control
characters are not significant for HTTP request parsing.
|
|
From now on, requests with spaces in URIs are immediately rejected rather
than allowed. Spaces were allowed in 31e9677b15a1 (0.8.41) to handle bad
clients. It is believed that now this behaviour causes more harm than
good.
|
|
Per RFC 3986 only the following characters are allowed in URIs unescaped:
unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
gen-delims = ":" / "/" / "?" / "#" / "[" / "]" / "@"
sub-delims = "!" / "$" / "&" / "'" / "(" / ")"
/ "*" / "+" / "," / ";" / "="
And "%" can appear as a part of escaping itself. The following
characters are not allowed and need to be escaped: %00-%1F, %7F-%FF,
" ", """, "<", ">", "\", "^", "`", "{", "|", "}".
Not escaping ">" is known to cause problems at least with MS Exchange (see
http://nginx.org/pipermail/nginx-ru/2010-January/031261.html) and in
Tomcat (ticket #2191).
The patch adds escaping of the following chars in all URI parts: """, "<",
">", "\", "^", "`", "{", "|", "}". Note that comments are mostly preserved
to outline important characters being escaped.
|
|
After 4954530db2af, the ";" character is escaped by
ngx_escape_uri(NGX_ESCAPE_ARGS).
|
|
HTTP clients are not allowed to generate such requests since Transfer-Encoding
introduction in RFC 2068, and they are not expected to appear in practice
except in attempts to perform a request smuggling attack. While handling of
such requests is strictly defined, the most secure approach seems to reject
them.
|
|
No valid CONNECT requests are expected to appear within nginx, since it
is not a forward proxy. Further, request line parsing will reject
proper CONNECT requests anyway, since we don't allow authority-form of
request-target. On the other hand, RFC 7230 specifies separate message
length rules for CONNECT which we don't support, so make sure to always
reject CONNECTs to avoid potential abuse.
|
|
Previously, TRACE requests were rejected before parsing Transfer-Encoding.
This is not important since keepalive is not enabled at this point anyway,
though rejecting such requests after properly parsing other headers is
less likely to cause issues in case of further code changes.
|
|
|
|
|
|
After 2096b21fcd10, a single RST_STREAM(NO_ERROR) may not result in an error.
This change removes several unnecessary ctx->type checks for such a case.
|
|
Previously, once received from upstream, it couldn't limit
opening additional streams in a cached keepalive connection.
|
|
Recent fixes to SSL shutdown with lingering close (554c6ae25ffc, 1.19.5)
broke logging of SSL variables. To make sure logging of SSL variables
works properly, avoid freeing c->ssl when doing an SSL shutdown before
lingering close.
Reported by Reinis Rozitis
(http://mailman.nginx.org/pipermail/nginx/2021-May/060670.html).
|
|
Instead of calling SSL_free() with each return point, introduced a single
place where cleanup happens. As a positive side effect, this fixes two
potential memory leaks on ngx_handle_read_event() and ngx_handle_write_event()
errors where there were no SSL_free() calls (though unlikely practical,
as errors there are only expected to happen due to bugs or kernel issues).
|
|
|
