| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
Similarly to the problem fixed in 2096b21fcd10 (ticket #1792),
when a "trailer only" gRPC response (that is, a response with the
END_STREAM flag in the HEADERS frame) was immediately followed by
RST_STREAM(NO_ERROR) in the data preread along with the response
header, RST_STREAM wasn't properly skipped and caused "upstream
rejected request with error 0" errors.
Observed with "unknown service" gRPC errors returned by grpc-go.
Fix is to set ctx->done if we are going to parse additional data,
so the RST_STREAM(NO_ERROR) is properly skipped. Additionally, now
ngx_http_grpc_filter() will complain about frames sent for closed
stream if there are any.
|
|
|
|
When installing or running from a non-root user it is sometimes required to
override default, compiled in error log path. There was no way to do this
without rebuilding the binary (ticket #147).
This patch introduced "-e" command line option which allows one to override
compiled in error log path.
|
|
Addon modules, both dynamic and static, can now use shared source files.
Shared sources result in only one make rule even if specified several
times in different modules.
|
|
|
|
|
|
Before introduction of request body filter in 42d9beeb22db, the only
possible return code from the ngx_http_request_body_filter() call
without actual buffers was NGX_HTTP_INTERNAL_SERVER_ERROR, and
the code in ngx_http_read_client_request_body() hardcoded the only
possible error to simplify the code of initial call to set rb->rest.
This is no longer true after introduction of request body filters though,
as a request body filter might need to return other errors, such as 403.
Fix is to preserve the error code actually returned by the call
instead of assuming 500.
|
|
Added logging before returning NGX_HTTP_INTERNAL_SERVER_ERROR if there
are busy buffers after a request body flush. This should never happen
with current code, though bugs can be introduced by 3rd party modules.
Make sure debugging will be easy enough.
|
|
When doing lingering close, the socket was first shut down for writing,
so SSL shutdown initiated after lingering close was not able to send
the close_notify alerts (ticket #2056).
The fix is to call ngx_ssl_shutdown() before shutting down the socket.
|
|
The code removed became dead after 98f03cd8d6cc (0.8.14),
circa when the request reference counting was introduced.
|
|
Now "s", "V", and "v" format specifiers may be prefixed with "x" (lowercase)
or "X" (uppercase) to output corresponding data in hexadecimal format.
In collaboration with Maxim Dounin.
|
|
|
|
|
|
|
|
In some cases it might be needed to reject SSL handshake based on SNI
server name provided, for example, to make sure an invalid certificate
is not returned to clients trying to contact a name-based virtual server
without SSL configured. Previously, a "ssl_ciphers aNULL;" was used for
this. This workaround, however, is not compatible with TLSv1.3, in
particular, when using BoringSSL, where it is not possible to configure
TLSv1.3 ciphers at all.
With this change, the ssl_reject_handshake directive is introduced,
which instructs nginx to reject SSL handshakes with an "unrecognized_name"
alert in a particular server block.
For example, to reject handshake with names other than example.com,
one can use the following configuration:
server {
listen 443 ssl;
ssl_reject_handshake on;
}
server {
listen 443 ssl;
server_name example.com;
ssl_certificate example.com.crt;
ssl_certificate_key example.com.key;
}
The following configuration can be used to reject all SSL handshakes
without SNI server name provided:
server {
listen 443 ssl;
ssl_reject_handshake on;
}
server {
listen 443 ssl;
server_name ~^;
ssl_certificate example.crt;
ssl_certificate_key example.key;
}
Additionally, the ssl_reject_handshake directive makes configuring
certificates for the default server block optional. If no certificates
are configured in the default server for a given listening socket,
certificates must be defined in all non-default server blocks with
the listening socket in question.
|
|
Similarly to ssl_conf_command, proxy_ssl_conf_command can be used to
set arbitrary OpenSSL configuration parameters as long as nginx is
compiled with OpenSSL 1.0.2 or later, when connecting to upstream
servers with SSL. Full list of available configuration commands
can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
|
|
Similarly to ssl_conf_command, proxy_ssl_conf_command (grpc_ssl_conf_command,
uwsgi_ssl_conf_command) can be used to set arbitrary OpenSSL configuration
parameters as long as nginx is compiled with OpenSSL 1.0.2 or later,
when connecting to upstream servers with SSL. Full list of available
configuration commands can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
|
|
With the ssl_conf_command directive it is now possible to set
arbitrary OpenSSL configuration parameters as long as nginx is compiled
with OpenSSL 1.0.2 or later. Full list of available configuration
commands can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
In particular, this allows configuring PrioritizeChaCha option
(ticket #1445):
ssl_conf_command Options PrioritizeChaCha;
It can be also used to configure TLSv1.3 ciphers in OpenSSL,
which fails to configure them via the SSL_CTX_set_cipher_list()
interface (ticket #1529):
ssl_conf_command Ciphersuites TLS_CHACHA20_POLY1305_SHA256;
Configuration commands are applied after nginx own configuration
for SSL, so they can be used to override anything set by nginx.
Note though that configuring OpenSSL directly with ssl_conf_command
might result in a behaviour nginx does not expect, and should be
done with care.
|
|
With this change, it is now possible to use ngx_conf_merge_ptr_value()
to merge keyval arrays. This change actually follows much earlier
changes in ngx_conf_merge_ptr_value() and ngx_conf_set_str_array_slot()
in 1452:cd586e963db0 (0.6.10) and 1701:40d004d95d88 (0.6.22).
To preserve compatibility with existing 3rd party modules, both NULL
and NGX_CONF_UNSET_PTR are accepted for now.
|
|
|
|
Previously, if there were multiple limits configured, errors in
ngx_http_complex_value() during processing of a non-first limit
resulted in reference count leak in shared memory nodes of already
processed limits. Fix is to explicity unlock relevant nodes, much
like we do when rejecting requests.
|
|
The proxy_smtp_auth directive instructs nginx to authenticate users
on backend via the AUTH command (using the PLAIN SASL mechanism),
similar to what is normally done for IMAP and POP3.
If xclient is enabled along with proxy_smtp_auth, the XCLIENT command
won't try to send the LOGIN parameter.
|
|
|
|
|
|
|
|
|
|
Found by Coverity (CID 1467637).
|
|
In 7717:e3e8b8234f05, the 1st bit was incorrectly used. It shouldn't
be used for bitmask values, as it is used by NGX_CONF_BITMASK_SET.
Additionally, special value "off" added to make it possible to clear
inherited userid_flags value.
|
|
|
|
|
|
|
|
This is in preparation for the next change.
Also, moved optimization from ngx_http_proxy_rewrite_regex_handler()
to ngx_http_proxy_rewrite().
|
|
The "false" parameter of the proxy_redirect directive is deprecated.
Warning has been emitted since c2230102df6f (0.7.54).
The "off" parameter of the proxy_redirect, proxy_cookie_domain, and
proxy_cookie_path directives tells nginx not to inherit the
configuration from the previous configuration level.
Previously, after specifying the directive with the "off" parameter,
any other directives were ignored, and syntax checking was disabled.
The syntax was enforced to allow either one directive with the "off"
parameter, or several directives with other parameters.
Also, specifying "proxy_redirect default foo" no longer works like
"proxy_redirect default".
|
|
Adds 'set' directive to the stream server context.
|
|
In rare cases, such as memory allocation failure, SSL_set_SSL_CTX() returns
NULL, which could mean that a different SSL configuration has not been set.
Note that this new behaviour seemingly originated in OpenSSL-1.1.0 release.
|
|
HTTP/2 code failed to run posted requests after calling the request body
handler, and this resulted in connection hang if a subrequest was created
in the body handler and no other actions were made.
|
|
If 400 errors were redirected to an upstream server using the error_page
directive, DATA frames from the client might cause segmentation fault
due to null pointer dereference. The bug had appeared in 6989:2c4dbcd6f2e4
(1.13.0).
Fix is to skip such frames in ngx_http_v2_state_read_data() (similarly
to 7561:9f1f9d6e056a). With the fix, behaviour of 400 errors in HTTP/2
is now similar to one in HTTP/1.x, that is, nginx doesn't try to read the
request body.
Note that proxying 400 errors, as well as other early stage errors, to
upstream servers might not be a good idea anyway. These errors imply
that reading and processing of the request (and the request headers)
wasn't complete, and proxying of such incomplete request might lead to
various errors.
Reported by Chenglong Zhang.
|
|
This fixes "SSL_shutdown() failed (SSL: ... bad write retry)" errors
as observed on the second SSL_shutdown() call after SSL shutdown fixes in
09fb2135a589 (1.19.2), notably when HTTP/2 connections are closed due
to read timeouts while there are incomplete writes.
|
|
This fixes "SSL_shutdown() failed (SSL: ... bad write retry)" errors
as observed on the second SSL_shutdown() call after SSL shutdown fixes in
09fb2135a589 (1.19.2), notably when sending fails in ngx_http_test_expect(),
similarly to ticket #1194.
Note that there are some places where c->error is misused to prevent
further output, such as ngx_http_v2_finalize_connection() if there
are pending streams, or in filter finalization. These places seem
to be extreme enough to don't care about missing shutdown though.
For example, filter finalization currently prevents keepalive from
being used.
|
|
The c->read->ready and c->write->ready flags need to be cleared to ensure
that appropriate read or write events will be reported by kernel. Without
this, SSL shutdown might wait till the timeout after blocking on writing
or reading even if there is a socket activity.
|
|
OpenSSL 1.1.1 fails to return SSL_ERROR_SYSCALL if an error happens
during SSL_write() after close_notify alert from the peer, and returns
SSL_ERROR_ZERO_RETURN instead. Broken by this commit, which removes
the "i == 0" check around the SSL_RECEIVED_SHUTDOWN one:
https://git.openssl.org/?p=openssl.git;a=commitdiff;h=8051ab2
In particular, if a client closed the connection without reading
the response but with properly sent close_notify alert, this resulted in
unexpected "SSL_write() failed while ..." critical log message instead
of correct "SSL_write() failed (32: Broken pipe)" at the info level.
Since SSL_ERROR_ZERO_RETURN cannot be legitimately returned after
SSL_write(), the fix is to convert all SSL_ERROR_ZERO_RETURN errors
after SSL_write() to SSL_ERROR_SYSCALL.
|
|
If the variant hash doesn't match one we used as a secondary cache key,
we switch back to the original key. In this case, c->body_start was kept
updated from an existing cache node overwriting the new response value.
After file cache update, it led to discrepancy between a cache node and
cache file seen as critical errors "file cache .. has too long header".
|
|
Previously, a variant not present in shared memory and stored on disk using a
secondary key was read using c->body_start from a variant stored with a main
key. This could result in critical errors "cache file .. has too long header".
|
|
Prodded by Xu Yang.
|
|
Previously the stale-if-error extension of the Cache-Control upstream header
triggered the return of a stale response for all error conditions that can be
specified in the proxy_cache_use_stale directive. The list of these errors
includes both network/timeout/format errors, as well as some HTTP codes like
503, 504, 403, 429 etc. The latter prevented a cache entry from being updated
by a response with any of these HTTP codes during the stale-if-error period.
Now stale-if-error only works for network/timeout/format errors and ignores
the upstream HTTP code. The return of a stale response for certain HTTP codes
is still possible using the proxy_cache_use_stale directive.
This change also applies to the stale-while-revalidate extension of the
Cache-Control header, which triggers stale-if-error if it is missing.
Reported at
http://mailman.nginx.org/pipermail/nginx/2020-July/059723.html.
|
|
|
|
|
|
|
|
Reworked connections reuse, so closing connections is attempted in
advance, as long as number of free connections is less than 1/16 of
worker connections configured. This ensures that new connections can
be handled even if closing a reusable connection requires some time,
for example, for a lingering close (ticket #2017).
The 1/16 ratio is selected to be smaller than 1/8 used for disabling
accept when working with accept mutex, so nginx will try to balance
new connections to different workers first, and will start reusing
connections only if this won't help.
|
