| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
As per perlxs, C preprocessor directives should be at the first
non-whitespace of a line to avoid interpreting them as comments.
#if and #endif are moved so that there are no blank lines before them
to retain them as part of the function body.
|
|
|
|
Previously, after sending a header we always sent a last buffer and
finalized a request with code 0, even in case of errors. In some cases
this resulted in a loss of ability to detect the response wasn't complete
(e.g. if Content-Length was removed from a response by gzip filter).
This change tries to propogate to a client information that a response
isn't complete in such cases. In particular, with this change we no longer
pretend a returned response is complete if we wasn't able to create
a temporary file.
If an error code suggests the error wasn't fatal, we flush buffered data
and disable keepalive, then finalize request normally. This allows to to
propogate information about a problem to a client, while still sending all
the data we've got from an upstream.
|
|
No semantic changes expected, though some checks are done differently.
In particular, the r->cached flag is no longer explicitly checked. Instead,
we relay on u->header_sent not being set if a response is sent from
a cache.
|
|
The NGX_HTTP_CLIENT_CLOSED_REQUEST code is allowed to happen after we
started sending a response (much like NGX_HTTP_REQUEST_TIME_OUT), so there
is no need to reset response code to 0 in this case.
|
|
Checks were added to both buffered and unbuffered code paths to detect
and complain if a response is incomplete. Appropriate error codes are
now passed to ngx_http_upstream_finalize_request().
With this change in unbuffered mode we now use u->length set to -1 as an
indicator that EOF is allowed per protocol and used to indicate response
end (much like its with p->length in buffered mode). Proxy module was
changed to set u->length to 1 (instead of previously used -1) in case of
chunked transfer encoding used to comply with the above.
|
|
That is, by default we assume that response end is signalled by
a connection close. This seems to be better default, and in line
with u->pipe->length behaviour.
Memcached module was modified accordingly.
|
|
In case of upstream eof, only responses with u->pipe->length == -1
are now cached/stored. This ensures that unfinished chunked responses
are not cached.
Note well - previously used checks for u->headers_in.content_length_n are
preserved. This provides an additional level of protection if protol data
disagree with Content-Length header provided (e.g., a FastCGI response
is sent with wrong Content-Length, or an incomple SCGI or uwsgi response),
as well as protects from storing of responses to HEAD requests. This should
be reconsidered if we'll consider caching of responses to HEAD requests.
|
|
While here, redundant parentheses removed. No functional changes.
|
|
|
|
There is no real difference from previously used 0 as NGX_HTTP_* will
become 0 in ngx_http_upstream_finalize_request(), but the change
preserves information about a timeout a bit longer. Previous use of
ETIMEDOUT in one place was just wrong.
Note well that with cacheable responses there will be a difference
(code in ngx_http_upstream_finalize_request() will store the error
in cache), though this change doesn't touch cacheable case.
|
|
Previously, ngx_http_upstream_finalize_request(0) was used in most
cases after errors. While with current code there is no difference,
use of NGX_ERROR allows to pass a bit more information into
ngx_http_upstream_finalize_request().
|
|
In all cases ngx_http_upstream_finalize_request() with NGX_ERROR now used.
Previously used NGX_HTTP_INTERNAL_SERVER_ERROR in the subrequest in memory
case don't cause any harm, but inconsistent with other uses.
|
|
|
|
|
|
This allows to finalize unfinished responses while still sending as
much data as available.
|
|
With previous code the p->temp_file->offset wasn't adjusted if a temp
file was written by the code in ngx_event_pipe_write_to_downstream()
after an EOF, resulting in cache not being used with empty scgi and uwsgi
responses with Content-Length set to 0.
Fix it to call ngx_event_pipe_write_chain_to_temp_file() there instead
of calling ngx_write_chain_to_temp_file() directly.
|
|
Previous code called ngx_http_finalize_request() with rc = 0. This is
ok if a response status was already set, but resulted in "000" being
logged if it wasn't. In particular this happened with limit_req
if a connection was prematurely closed during limit_req delay.
|
|
After a failed partial match we now check if there is another partial
match in previously matched substring to fix cases like "aab" in "aaab".
The ctx->saved string is now always sent if it's present on return
from the ngx_http_sub_parse() function (and reset accordingly). This
allows to release parts of previously matched data.
|
|
If a pattern was partially matched at a response end, partially matched
string wasn't send. E.g., a response "fo" was truncated to an empty response
if partially mathed by a pattern "foo".
|
|
|
|
No functional changes.
|
|
|
|
Based on a patch by Sepherosa Ziehau.
|
|
No functional changes.
|
|
It is possible to send FLAG_FIN in additional empty data frame, even if it is
known from the content-length header that request body is empty. And Firefox
actually behaves like this (see ticket #357).
To simplify code we sacrificed our microoptimization that did not work right
due to missing check in the ngx_http_spdy_state_data() function for rb->buf
set to NULL.
|
|
The exsltRegisterAll() needs to be called before XSLT stylesheets
are compiled, else stylesheet compilation hooks will not work. This
change fixes EXSLT Functions extension.
|
|
Currently this flag is needed for epoll and rtsig, and though these methods
usually present on different platforms than kqueue, nginx can be compiled to
support all of them.
|
|
|
|
The $NGX_AUTO_CONFIG_H added to perl module Makefile dependencies to
make sure it's always rebuild after a configure. It is needed as we
expand various variables used for Makefile generation during configure
(in particular, nginx version).
|
|
The call to ngx_sock_ntop() in ngx_connection_local_sockaddr() might be
performed with the uninitialized "len" variable. The fix is to initialize
variable to the size of corresponding socket address type.
The issue was introduced in commit 05ba5bce31e0.
|
|
On Linux, sockaddr length is required to process unix socket addresses properly
due to unnamed sockets (which don't have sun_path set at all) and abstract
namespace sockets.
|
|
|
|
ngx_http_upstream_get_keepalive_peer() may return NGX_DONE to
indicate that the cached keepalive connection is reused.
|
|
The stderr redirection code is moved to ngx_log_redirect_stderr().
The opening of the default log code is moved to ngx_log_open_default().
|
|
|
|
|
|
|
|
Minimal data length we expect for further calls was calculated incorrectly
if parsing stopped right after parsing chunk size. This might in theory
affect clients and/or backends using LF instead of CRLF.
Patch by Dmitry Popov.
|
|
On Linux x32 inclusion of sys/sysctl.h produces an error. As sysctl() is
only used by rtsig event method code, which is legacy and not compiled
in by default on modern linuxes, the sys/sysctl.h file now only included
if rtsig support is enabled.
Based on patch by Serguei I. Ivantsov.
|
|
When several "error_log" directives are specified in the same configuration
block, logs are written to all files with a matching log level.
All logs are stored in the singly-linked list that is sorted by log level in
the descending order.
Specific debug levels (NGX_LOG_DEBUG_HTTP,EVENT, etc.) are not supported
if several "error_log" directives are specified. In this case all logs
will use debug level that has largest absolute value.
|
|
|
|
|
|
|
|
The cycle->new_log->log_level should only be initialized by ngx_init_cycle()
if no error logs were found in the configuration. This move allows to get rid
of extra initialization in ngx_error_log().
|
|
Avoid stripping the status text when proxying for compatibility with http.
|
|
It was broken by X-Forwarded-For related changes in f7fe817c92a2 (1.3.14)
as hh->offset is no longer 0 for Cookie.
|
|
The *u previously logged isn't yet initialized at this point, and
Valgrind complains.
|
|
Found by Valgrind.
|
